2 layers25.4 × 54.5 mm
Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84
4 layers13.2 × 30 mm
AditBoard
skot/aditBoard16Antminer hashboard data cable to USB adapter. Based on the RP2040
- Size
- 13.2 × 30 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 56
- Pads
- 163
- Tracks, vias
- 321, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Mar 2024
- Updated
- 10 Jun 2025
Overview
AditBoard is an open-source printed circuit board by skot, from the skot/aditBoard repository on GitHub. It is a 4-layer board of 13.2 × 30 mm with 31 parts on 56 nets, routed with 321 tracks and 54 vias.
It is built around the RP2040 and AP2112K-3.3TRG1. Its parts include 16 capacitors, 8 resistors, 3 ICs, 2 connectors and 1 crystal. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
readme.mdParts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C10, C11, C12, C13, C14, C15, C16 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9, C17, C18 |
| 3 | 4.7K | Resistor_SMD:R_0402_1005Metric | R25, R27, R29 |
| 2 | 30pF | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 33 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 12MHz | aditBoard:OSC-SMD_4P-L3.2-W2.5-BL | Y1 |
| 1 | AP2112K-3.3TRG1 | aditBoard:SOT-25-5_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | Hashboard0 | aditBoard:PinHeader_2x09_P2.00mm_Horizontal | J2 |
| 1 | LOGO | aditBoard:logo | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | aditBoard:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25X40CLUXIG TR | aditBoard:USON8_L2.0-W3.0-P0.50-BL-EP | U2 |
Questions
How big is the AditBoard PCB?
It measures 13.2 × 30 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AditBoard use?
31 parts, built around the RP2040 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AditBoard KiCad files?
From the skot/aditBoard repository on GitHub, at the commit this page was made from: the board is aditBoard.kicad_pcb and its schematic aditBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AditBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask skot before reusing the design.
Similar boards
- 6 layers10.2 × 163.8 mm
RP2040-Breadstick
Breadstick-Innovations/Raspberry-Breadstick
A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.
94 parts19Apache-2.0 - 2 layers45.6 × 82.1 mm
Qingpi
u1f992/qingpi
Qingpi aka NeoCtrlMod is a project for externally controlling the Nintendo 3DS.
53 parts11GPL-3.0 - 2 layers39.5 × 64.7 mm
- 4 layers23.2 × 36.1 mm
GB LINK v1.4
Chisfamily/GB-Link-USB-Hardware
An open-source USB adapter for the Game Boy Link Cable.
60 parts4 - 2 layers121.9 × 81 mm
Cav16 pico
Charading/SHEGO16-QMK-Hall-Effect-Macropad
An RP2040-powered 4x4 15 key macropad with a knob on the top row, that runs custom QMK firmware that allows analogue hall effect sensors to work, also has SOCD, works with VIA and SignalRGB
132 parts3 - 4 layers119 × 63.2 mm
OpenChordM1
FugLong/OpenChord
An open-source music device for portable, expressive, and extensible audio creation.
75 parts3MIT - 4 layers44 × 44 mm
