
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

UP2/UP Xtreme to DediProg SPI Flash Adapter
UP SPI Adapter is an open-source printed circuit board by skiselev, from the skiselev/up-dediprog-adapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15.9 × 11.4 mm with 2 parts on 13 nets, routed with 25 tracks and 8 vias.
It belongs with the interfaces and adapters boards of this library.
This is an adapter for flashing the SPI BIOS on Aaeon UP Squared and UP Xtreme boards using DediProg SF100 or DediProg SF600 with ADP-SF600-TO-SF100-CB adapter


UP2/Xtreme to DediProg Adapter project on Mouser.com - View and order all components except of the PCB.
UP2/Xtreme to DediProg Adapter project on OSH Park - Order PCBs.
| Component type | Reference | Description | Quantity | Possible sources and notes |
|---|---|---|---|---|
| PCB | UP2/Xtreme to DediProg Adapter PCB | 1 | Order from OSH Park or another PCB manufacturer using provided KiCad or Gerber files | |
| Connector | J1 | 2x6 pin socket, 1.27 mm lead pitch | 1 | Mouser 649-221321-00012T4LF |
| Connector | J2 | 2x4 pin header, 2.54 mm lead pitch | 1 | Mouser 571-5-146131-3 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | DediProg | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMD | J1 |
| 1 | UP | Connector_PinSocket_1.27mm:PinSocket_2x06_P1.27mm_Vertical_SMD | J2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 15.9 × 11.4 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the skiselev/up-dediprog-adapter repository on GitHub, at the commit this page was made from: the board is KiCad/UP-SPI-Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).