
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Selection of usefull Kicad libraries
Arduino Fio is an open-source printed circuit board by sixtemesseven, from the sixtemesseven/Kicad_Libraries repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 64.8 mm with 2 parts on 26 nets.
Some of the Libraries are mine, some are copies. Regardless I do not intend to claim any ownership / licence on any of them. Also NO WARRANTY WHATSOEVER! USE AT YOUR OWN RISK AND CHECK THE PARTS CAREFULLY!!!
If someone feels like I'm infringing on his copyright, please go over to eeTec.ch and drop me a line. I will remove the content asap.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Analog | Socket_Arduino_Fio:Socket_Strip_Straight_1x14 | P2 |
| 1 | Digital | Socket_Arduino_Fio:Socket_Strip_Straight_1x14 | P1 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 27.9 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sixtemesseven/Kicad_Libraries repository on GitHub, at the commit this page was made from: the board is ardukicad/kicad-library-master/template/Arduino_Fio/Arduino_Fio.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).