
Quad
sirkha/PocketBeagleStepperCarrier
A board that utilizes a PocketBeagle to control stepper motors via Pololu like carriers.

A board that utilizes a PocketBeagle to control stepper motors via Pololu like carriers.
Dual is an open-source printed circuit board by sirkha, from the sirkha/PocketBeagleStepperCarrier repository on GitHub. It is a 2-layer board of 140 × 70 mm with 193 parts on 154 nets, routed with 5,264 tracks and 744 vias.
It is built around the ACS723LLCTR-05AB-T, LM2576HVS-ADJ and 24LC256-I/P, with the TPD4S012DRY, FDC6420C and SK34A among its other parts. Its parts include 61 crystals, 41 connectors, 16 resistors, 8 capacitors and 6 ICs. It belongs with the robots and motor control boards of this library.
A board that utilizes a PocketBeagle to control stepper motors via Pololu like carriers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | RoutaCell | footprints:RoutaCell | x114, x115, x116, x117, x118, x119, x120, x121, x122, x123, x126, x127, x128, x129, x130, x131 +14 |
| 13 | 1K2 | footprints:R_Array_1206x04 | RN101, RN201, RN202, RN203, RN204, RN205, RN206, RN207, RN208, RN209, RN209, RN210, RN211 |
| 10 | 01x03 | footprints:Pin_Header_Straight_1x03_Pitch2.54mm_Blank | J104, J105, J106, J107, J108, J109, J114, J115, J116, J117 |
| 10 | RoutaCell | footprints:RoutaCellRight | x150, x151, x152, x153, x154, x155, x156, x157, x158, x159 |
| 10 | RoutaCell | footprints:RoutaCellLeft | x102, x103, x104, x105, x106, x107, x108, x109, x110, x111 |
| 9 | 01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J101, J103, J110, J111, J112, J113, J207, J209, JP201 |
| 9 | 12K | Resistors_SMD:R_0603_HandSoldering | R204, R205, R205, R206, R206, R302, R304, R402, R404 |
| 7 | 01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J208, J210, J211, J218, J219, JP303, JP403 |
| 7 | JPNC | footprints:JPNC | JP205, JP206, JP207, JP210, JP212, JP302, JP402 |
| 5 | 2PostTerm | footprints:TerminalBlock_Custom_1x02.54mm | J213, J214, J215, J216, J217 |
| 4 | JPNC | footprints:JPNC_Large | JP101, JP102, JP103, JP104 |
| 4 | JPNO | footprints:JPNO_Large | JP105, JP106, JP107, JP108 |
| 4 | JPNO | footprints:JPNO | JP202, JP203, JP204, JP211 |
| 4 | Mounting_Hole_PAD | Mounting_Holes:MountingHole_3.2mm_M3_ISO14580_Pad | MK201, MK202, MK203, MK204 |
| 4 | RoutaCell | footprints:RoutaCellTop | x101, x113, x125, x137 |
| 3 | 01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J201, JP301, JP401 |
| 3 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C203, C204, C205 |
| 3 | 1K2 | Resistors_SMD:R_0603_HandSoldering | R202, R303, R403 |
| 3 | FDC6420C | TO_SOT_Packages_SMD:SOT-363_SC-70-6 | Q201, Q301, Q401 |
| 3 | RoutaCell | footprints:RoutaCellBottom | x124, x136, x148 |
| 2 | 01x03 | Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_Straight | J203, J205 |
| 2 | 01x04 | footprints:Molex-SL-4POS | J202, J204 |
| 2 | 02x04 | footprints:Pin_Header_Straight_2x04_Pitch2.54mm_AB | JP208, JP209 |
| 2 | 1000uF | footprints:CP_Elec_17x17 | C207, C208 |
| 2 | 100uH | footprints:BOURNS-SRN1060 | L201, L202 |
| 2 | 120 | SMD_Packages:SMD-1206_Pol | FB201, FB202 |
| 2 | 1nF | Capacitors_SMD:C_0603_HandSoldering | C201, C202 |
| 2 | 22 | Resistors_SMD:R_0603_HandSoldering | R301, R401 |
| 2 | ACS723LLCTR-05AB-T | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U202, U203 |
| 2 | D | footprints:D_0603_HandSoldering | D301, D401 |
| 2 | LM2576HVS-ADJ | TO_SOT_Packages_SMD:TO-263-5_TabPin3 | U205, U206 |
| 2 | Pololu_Breakout_A4988 | footprints:Pololu_Breakout-16_15.2x20.3mm | A301, A401 |
| 2 | Pololu_Breakout_DRV8825 | footprints:Pololu_Breakout-16_15.2x20.3mm | A302, A402 |
| 2 | Pololu_Breakout_DRV8834 | footprints:Pololu_Breakout-16_15.2x20.3mm | A303, A403 |
| 2 | Pololu_Breakout_DRV8880 | footprints:Pololu_Breakout-17_15.2x20.3mm | A304, A404 |
| 2 | SK34A | Diodes_SMD:D_SMB-SMC_Universal_Handsoldering | D201, D202 |
| 1 | 02x04 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | J102 |
| 1 | 02x05 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | x100 |
| 1 | 1000uF | Capacitors_SMD:CP_Elec_8x10 | C209 |
| 1 | 24LC256 | footprints:Dip-MSOP-8 | U204 |
| 1 | 3.9K | Resistors_SMD:R_0603_HandSoldering | R203 |
| 1 | 4PostTerm | footprints:TerminalBlock_Custom_1x04P5.08mm | J212 |
| 1 | 50K | Potentiometers:Potentiometer_Trimmer-EVM3E | RV201 |
| 1 | FDG1024NZ | TO_SOT_Packages_SMD:SOT-363_SC-70-6 | Q202 |
| 1 | PocketBeagle | footprints:PocketBeagle | A201 |
| 1 | RoutaCell | footprints:RoutaCellTopRight | x149 |
| 1 | RoutaCell | footprints:RoutaCellBottomLeft | x112 |
| 1 | RoutaCell | footprints:RoutaCellBottomRight | x160 |
| 1 | Rsel | Resistors_SMD:R_0603_HandSoldering | R201 |
| 1 | TPD4S012 | Housings_SON:WSON6_1.5x1.5mm_Pitch0.5mm | U201 |
| 1 | USB_OTG | footprints:USB_Micro-B_Molex-105017-0001_CircularHoles | J206 |
The 192 most common of 193 parts.

sirkha/PocketBeagleStepperCarrier
A board that utilizes a PocketBeagle to control stepper motors via Pololu like carriers.


beagleboard/pocketbeagle
BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable

The-OpenROAD-Project-Attic/SA-PCB
Annealing-based PCB placement tool

e-ale/BaconBitsCapeHW
Design files for the Bacon Bits MiniCape for the PocketBeagle

abhishek-kakkar/beaglelogic-standalone
BeagleLogic implemented as a turnkey and standalone logic analyzer

Yongxin-Lu/self_balancing_car
a stm32 self-balancing car. include pcb board, program and model.

sekigon-gonnoc/mtch6102_breakout
Breakout board of MTCH6102, a 2D capacitive touch sensor, for DIY split keyboards with TRRS connectors.

It measures 140 × 70 mm and has 2 copper layers, 1.6 mm thick.
193 parts, built around the ACS723LLCTR-05AB-T, LM2576HVS-ADJ, 24LC256-I/P and TPD4S012DRY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sirkha/PocketBeagleStepperCarrier repository on GitHub, at the commit this page was made from: the board is Electrical/Dual/Dual.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sirkha before reusing the design.