2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers57 × 125 mm
Dl3000-adapters
sirhcel/dl3000-adapters6Banana Jack and BNC Adapters for RIGOL DL3000 Electronic Loads
- Size
- 57 × 125 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 6
- Pads
- 27
- Tracks, vias
- 0, 0
- Pours
- 22
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jan 2020
- Updated
- 12 May 2021
Overview
Dl3000-adapters is an open-source printed circuit board by sirhcel, from the sirhcel/dl3000-adapters repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 57 × 125 mm with 14 parts on 6 nets.
It belongs with the interfaces and adapters and power boards of this library.
README
README.mdBanana Jack and BNC Adapters for RIGOL DL3000 Electronic Loads
Overview
This project is about banana jack and BNC adapters for RIGOL's DL3000 series electronic loads. There are already adapters for narrower binding posts (like BK Precision, ...) but I did not find any for the 39 mm pitch of the RIGOL DL3000 series.
These adapters are meant for conveniently feeding a few amperes - not for high current applications.
Variants and Bills of Material
BNC Adapter
The BNC adapter has a pretty standard footprint. So you should be able to find a suitable replacement from your preferred distributor. Information on replacement parts welcome.
- 1 PCB
- KiCad design files form this repository
- Gerber and drill files
- Or just order it from OSH Park
- 1 BNC connector
Banana Jack Adapters
There are two board variants for sourcing the connectors from different distributors.
PB4 Banana Jack Adapter
- 1 PCB
- KiCad design files from this repository
- Gerber an drill files
- Or just order it from OSH Park
- 1 connector Hirschmann Test and Measurement PB4 red
- 1 connector Hirschmann Test and Measurement PB4 black
73099 Banana Jack Adapter
- 1 PCB
- KiCad design files form this repository
- Gerber and drill files
- Or just order it from OSH Park
- 1 connector Pomona 73099 red
- 1 connector Pomona 73099 black
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Binding Posts | TestPoint_Local:TestPoint_2Pads_D15.0mm_Drill7.0mm_RIGOL_DL3000_Binding_Posts | TP1, TP2, TP3 |
| 2 | Banana Jack | Connector_Local:Pomona_73099 | J4, J5 |
| 2 | Banana Jack | Connector_Local:Hirschmann_SKS_PB4 | J1, J3 |
| 1 | BNC | Connector_Coaxial:BNC_TEConnectivity_1478204_Vertical | J2 |
The 8 most common of 14 parts.
Questions
How big is the Dl3000-adapters PCB?
It measures 57 × 125 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dl3000-adapters use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dl3000-adapters KiCad files?
From the sirhcel/dl3000-adapters repository on GitHub, at the commit this page was made from: the board is dl3000-adapters.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dl3000-adapters design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
