2 layers35 × 50 mm
2 layers124 × 85.9 mm
Lets split
SirEelBiscuits/lets-splita custom remake of the lets split keyboard pcb
- Size
- 124 × 85.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 55
- Pads
- 280
- Tracks, vias
- 448, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Jul 2021
- Updated
- 3 Jul 2021
Overview
Lets split is an open-source printed circuit board by SirEelBiscuits, from the SirEelBiscuits/lets-split repository on GitHub. It is a 2-layer board of 124 × 85.9 mm with 60 parts on 55 nets, routed with 448 tracks and 1 via.
Its parts include 25 switches, 24 diodes, 3 resistors, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdlets-split
a custom remake of the lets split keyboard pcb
PCB designed to match this case.
Uses the QMK firmware, my fork of which is here: https://github.com/SirEelBiscuits/qmk_firmware/tree/garnet
As yet, keyboard and keymap are not merged upstream.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | D_Small | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 2 | 9.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | Jack Obversed Jumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Jack Reversed Jumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Key_A | keyswitches:SW_MX_reversible | SW8 |
| 1 | Key_Alt | keyswitches:SW_MX_reversible | SW21 |
| 1 | Key_B | keyswitches:SW_MX_reversible | SW18 |
| 1 | Key_C | keyswitches:SW_MX_reversible | SW16 |
| 1 | Key_Ctrl | keyswitches:SW_MX_reversible | SW19 |
| 1 | Key_D | keyswitches:SW_MX_reversible | SW10 |
| 1 | Key_E | keyswitches:SW_MX_reversible | SW4 |
| 1 | Key_Esc | keyswitches:SW_MX_reversible | SW7 |
| 1 | Key_F | keyswitches:SW_MX_reversible | SW11 |
| 1 | Key_Fn | keyswitches:SW_MX_reversible | SW22 |
| 1 | Key_G | keyswitches:SW_MX_reversible | SW12 |
| 1 | Key_Q | keyswitches:SW_MX_reversible | SW2 |
| 1 | Key_R | keyswitches:SW_MX_reversible | SW5 |
| 1 | Key_Raise | keyswitches:SW_MX_reversible | SW23 |
| 1 | Key_S | keyswitches:SW_MX_reversible | SW9 |
| 1 | Key_Shift | keyswitches:SW_MX_reversible | SW13 |
| 1 | Key_Space | keyswitches:SW_MX_reversible | SW24 |
| 1 | Key_T | keyswitches:SW_MX_reversible | SW6 |
| 1 | Key_Tab | keyswitches:SW_MX_reversible | SW1 |
| 1 | Key_V | keyswitches:SW_MX_reversible | SW17 |
| 1 | Key_W | keyswitches:SW_MX_reversible | SW3 |
| 1 | Key_Win | keyswitches:SW_MX_reversible | SW20 |
| 1 | Key_X | keyswitches:SW_MX_reversible | SW15 |
| 1 | Key_Z | keyswitches:SW_MX_reversible | SW14 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW25 |
| 1 | USB_C_Receptacle_USB2.0 | custom-footprints:USB_C_GCT_USB4085 | J1 |
The 56 most common of 60 parts.
Questions
How big is the Lets split PCB?
It measures 124 × 85.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lets split use?
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lets split KiCad files?
From the SirEelBiscuits/lets-split repository on GitHub, at the commit this page was made from: the board is lets-split.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lets split design in my own project?
Its repository states no licence, so its author keeps all rights: ask SirEelBiscuits before reusing the design.
Similar boards
- 2 layers32.9 × 119.1 mm
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers58 × 110 mm
- 2 layers52 × 90 mm
- 2 layers42.5 × 80 mm
- 2 layers57.4 × 12 mm
- 2 layers87.9 × 123.9 mm
Bitdoglab
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
60 parts203