

Receiver test
- Size
- 63 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 64
- Pads
- 296
- Tracks, vias
- 455, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Dec 2020
- Updated
- 18 May 2021
Overview
Receiver test is an open-source printed circuit board by simonyiszk, from the simonyiszk/open-hf-sdr repository on GitHub. It is a 2-layer board of 63 × 56 mm with 126 parts on 64 nets, routed with 455 tracks and 41 vias.
It is built around the ADE-1H+, MCP6D11-E/MG and FST3253M, with the BC847BS and MMBT5089 among its other parts. Its parts include 41 capacitors, 37 resistors, 18 inductors, 5 connectors and 4 ICs.
Main components
5ADE-1H+
SMD-6P-40℃~+85℃ 0MHz~500MHz 1 14dBm 23dBm 5.3dB 500kHz~500MHz 500kHz~500MHz 53.7dB 65.8dB SMD-6P RF Mixers ROHSMini-CircuitsRF MixersMCP6D11-E/MG
QFN-16-EP(3x3)-40℃~+125℃ 1 1.49mA 10nA 112dB 117dB 2.5V~5.5V 200ns 25V/us 25uV 2uV/℃ 5nV/√Hz@10kHz 66mA 700nA 90MHz Differential Enable/shutdown function、Single-ended to differential conversion、Integrated ADC driver、Adjustable output common-mode voltage Rail-to-rail output QFN-16-EP(3x3) Differential Amplifiers ROHSMicrochip TechnologyDifferential AmplifiersFST3253M
SOIC-16-40℃~+85℃ 4V~5.5V Multiplexer/Demultiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, DecodersBC847BS
SOT-363Bipolar (BJT)hongjiachengMMBT5089
SOT-23-55℃~+150℃ 1 NPN 100mA 200mW 25V 4.5V 400 500mV 50MHz 50nA NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdOpen HF SDR
Specs
- 0.5-30 MHz input freq range
Receiver
First stage
- 30 MHz low-pass filter
- Programmable auttenator with 10, 20, and 30 dB options
- Highly linear mixer to 37.224 MHz IF
Second stage
- IF filter for 37.224 MHz
- IF amplifier
- Mixer to 9 MHz IF
Third stage
- IF filter for 9 MHz IF with 0.5 MHz bandwidth
- Diff amp to ADC
Fourth stage
- ADC with 8 MSps, undersampling the 9 MHz IF to 1 MHz
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | BP | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4, R7, R8, R9, R17, R19, R23, R25, R26, R28 |
| 9 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14, C18, C19, C20, C22, C37, C38, C41 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C11, C12, C15, C16, C21, C39, C40 |
| 8 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | TestPoint_2Pole | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP9, TP10, TP11, TP12, TP13 |
| 4 | 2u2 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L9, L10, L13, L15 |
| 4 | 3mm spacer | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R21 |
| 3 | 390n | Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1, L2, L3 |
| 3 | 390p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C9, C10 |
| 3 | 47n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5, L6, L7 |
| 3 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R14 |
| 2 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R24 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15, R18 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C35, C36 |
| 2 | 10u | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L11, L16 |
| 2 | 150p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6 |
| 2 | 180p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C27, C32 |
| 2 | 18p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26, C31 |
| 2 | 220n | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L12, L14 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R29, R30 |
| 2 | 270p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 2 | 31k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R22 |
| 2 | 33p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C25, C33 |
| 2 | 36p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C23, C24 |
| 2 | 39 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R32, R33 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R35, R36 |
| 2 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C30 |
| 2 | 8u2 | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L17, L18 |
| 2 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J5 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R34 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C17 |
| 1 | 15p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29 |
| 1 | 180n | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L8 |
| 1 | 19k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | 28.224 MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 28k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 2k5 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R27 |
| 1 | 3 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R37 |
| 1 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 47u | Capacitor_SMD:CP_Elec_6.3x5.3 | C1 |
| 1 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | 68p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C28 |
| 1 | 9p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C34 |
| 1 | ADE-1H+ | RF_Mini-Circuits:Mini-Circuits_CD542_LandPatternPL-052 | U1 |
| 1 | BC847BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | FST3253 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | IF_IN | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J3 |
| 1 | MCP6D11 | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | MMBT5089 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RF_IN | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SA612 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
Similar boards
- 2 layers100 × 49.9 mm

- 2 layers90 × 60 mm

- 2 layers45 × 50 mm

Trem 23
soggybag/Trem-SMD
A tremolo for guitar in a Hammond 1590B: a TL064 LFO with SHAPE and SQ/TRI, driving a discrete LM3086-style transistor VCA.
78 parts - 2 layers100 × 86 mm

- 2 layers169.9 × 108.7 mm

- 2 layers54.6 × 89.5 mm

- 2 layers164 × 100 mm

- 2 layers100 × 80 mm

Questions
How big is the Receiver test PCB?
It measures 63 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Receiver test use?
126 parts, built around the ADE-1H+, MCP6D11-E/MG, FST3253M and BC847BS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver test KiCad files?
From the simonyiszk/open-hf-sdr repository on GitHub, at the commit this page was made from: the board is receiver_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver test design in my own project?
Its repository states no licence, so its author keeps all rights: ask simonyiszk before reusing the design.