2 layers20.5 × 24.8 mm
2 layers
Radar pcb
Simon2009sch/radar-pcbThe PCB for my Radar system for my smarthome
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 36
- Pads
- 63
- Tracks, vias
- 129, 17
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Oct 2026
- Updated
- 26 Oct 2026
Overview
Radar pcb is an open-source printed circuit board by Simon2009sch, from the Simon2009sch/radar-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 8 parts on 36 nets, routed with 129 tracks and 17 vias.
Its parts include 3 connectors and 2 resistors.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, PIR1 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 1 | BME280_Breakout | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | BME280_1 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | LD2450 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | LD2450_1 |
| 1 | ~ | microcontroller:ESP32S-NODEMCU-Pin-Socket | ESP32-NODECMU1 |
Questions
What parts does the Radar pcb use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Radar pcb KiCad files?
From the Simon2009sch/radar-pcb repository on GitHub, at the commit this page was made from: the board is radar-pcb.kicad_pcb and its schematic radar-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Radar pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0