2 layers115 × 75 mm
2 layers51.7 × 68.4 mm
Sensor
simle-stardust/PCB- Size
- 51.7 × 68.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 27
- Pads
- 86
- Tracks, vias
- 107, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Apr 2020
- Updated
- 5 Jul 2021
Overview
Sensor is an open-source printed circuit board by simle-stardust, from the simle-stardust/PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.7 × 68.4 mm with 25 parts on 27 nets, routed with 107 tracks and 4 vias.
It is built around the DHT22. Its parts include 9 resistors, 8 diodes, 3 ICs and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdStardust-PCB
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D9, D10, D11, D12 |
| 8 | R330 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8, R9 |
| 4 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | A0-H1, A0-L1, A1-H1, A1-L1 |
| 1 | Conn_01x08_Female | Stardust:691382040008 | J1 |
| 1 | DHT22 | Stardust:DHT22_15.0x25.0_P2.54mm_Horizontal | U1 |
| 1 | R10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | SSCDRNN015PASA5 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | U2 |
| 1 | TCA9555DBR | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U3 |
Questions
How big is the Sensor PCB?
It measures 51.7 × 68.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor use?
25 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor KiCad files?
From the simle-stardust/PCB repository on GitHub, at the commit this page was made from: the board is sensor/sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from simle-stardust/PCB
3- 2 layers145 × 50 mm
- 2 layers115 × 75 mm
Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers40.6 × 50.8 mm
Iot sourdough starter monitor
justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.
7 parts93GPL-3.0 - 2 layers28 × 13 mm
DHT22 pcb
MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle
5 parts68MIT - 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers74.9 × 40.6 mm
Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers81.3 × 36.8 mm
AirQualitySensor
Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
44 parts16Apache-2.0