Skip to the content
2 layers30.7 × 36.8 mmWiiSD-2.0, the printed circuit board in 3D

WiiSD 2.0 upgrade replacement PCB

Size
30.7 × 36.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
14
Pads
34
Tracks, vias
76, 36
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 Oct 2024
Updated
4 Oct 2024

Overview

WiiSD-2.0 is an open-source printed circuit board by silverstee1, from the silverstee1/WiiSD-2.0 repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 30.7 × 36.8 mm with 3 parts on 14 nets, routed with 76 tracks and 36 vias.

It is built around the 74AHC1G32GW. Its parts include 2 connectors and 1 IC.

Main components

1

README

README.md

WiiSD-2.0

WiiSD 2.0 Upgrade PCB

Replacement upgrade PCB for WiiSD adapters sold on aliexpress/amazon etc to V2.0 for use on GameCube's Front Memcard Slot B

Based on the SD2SP2 2.0 made by Extrems, Thank you for your hard work!

Important

When using the adapter make sure to have the Latest Version of Swiss, Due to the way Swiss handles it in SLOT A it acts like a normal speed Passive SDGecko, in SLOT B it works in Semi-Passive 2.0 enhanced speed mode.

https://github.com/emukidid/swiss-gc

20241004_164817-min

WiiSD 2.0 BOM

The PCB must be ordered (e.g. from jlcpcb) in 0.8mm thickness with surface finish ENIG at minimum.

WiiSD V2.0 PCB

J2: SD Slot - Digikey Part# 2223-SD-4-BCT-ND

LCSC Part# C7529393

alt LCSC Part# C266601 , C961674

U1: OR Gate IC - DigiKey Part# 296-1093-1-ND

LCSC Part# C7470

Alt Nexperia Digikey Part# 1727-3067-1-ND

LCSC Alt Nexperia Part# C12488

Parts

3
QtyValueFootprintReferences
174AHC1G32Package_TO_SOT_SMD:SC-74A-5_1.55x2.9mm_P0.95mmU1
1SD-4-BMICROSDCARD_Library:SD4BJ2
1~GCSP1_Library:GC_MEMCARDJ1

Similar boards

  • 2 layersDiffuino selector, the printed circuit board in 3D

    Diffuino selector

    elixpo/elixpo_chapter

    Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.

    46 parts85
  • 2 layers31.4 × 20.6 mmWindow sensor V5, the printed circuit board in 3D

    Window sensor V5

    gadjet/Window-Door-sensor-Version-5

    Version 5 of the Window/Door sensor project this time with ultra low current consumption

    32 parts70GPL-2.0
  • 2 layers126.8 × 54.7 mmSnes controller pcb, the printed circuit board in 3D

    Snes controller pcb

    misteraddons/Reflex-CTRL

    Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |

    67 parts19
  • 2 layers30 × 30.5 mmSDGeckoLED, the printed circuit board in 3D

    SDGeckoLED

    silverstee1/SDGecko-2.0

    MicroSD Card Adapter For GameCube's Front Memcard Slots v2.0

    8 parts17Unlicense
  • 2 layers36.5 × 46.3 mmGamecube SD2SP2PRO, the printed circuit board in 3D

    Gamecube SD2SP2PRO

    silverstee1/SD2SP2-Pro

    Micro SD Card Adapter v1 and v2.0 for Gamecube's Serial Port 2

    4 parts16MIT
  • 2 layers81.7 × 372 mmUEggMG v3b, the printed circuit board in 3D

    UEggMG v3b

    ultimaterobotics/uEMG

    uEMG project

    80 parts14MIT
  • 4 layers40 × 19 mmRom2k40, the printed circuit board in 3D

    Rom2k40

    mengstr/Rom2k40

    EPROM emulator based on RP2040

    28 parts12
  • 2 layers47 × 28 mmUMyo v3 1, the printed circuit board in 3D

    UMyo v3 1

    ultimaterobotics/uMyo_v3_1_pcb

    PCB files for uMyo v3.1

    53 parts12CERN-OHL-P-2.0

Questions

How big is the WiiSD-2.0 PCB?

It measures 30.7 × 36.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the WiiSD-2.0 use?

3 parts, built around the 74AHC1G32GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WiiSD-2.0 KiCad files?

From the silverstee1/WiiSD-2.0 repository on GitHub, at the commit this page was made from: the board is Kicad/WiiSD2.0/WiiSD2.0.kicad_pcb and its schematic Kicad/WiiSD2.0/WiiSD2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the WiiSD-2.0 design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).