Skip to the content
2 layers53.3 × 20.3 mmEsp 12e proto board, the printed circuit board in 3D

Contains set of Gerber files and KiCad source projects for ESP-12E\ESP-12F adapter PCB. Presented PCB allows ESP-12-E\F modules to be plugged into breadboard.

Size
53.3 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
22
Pads
44
Tracks, vias
129, 11
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Jan 2021
Updated
17 Jan 2021

Overview

Esp 12e proto board is an open-source printed circuit board by sigma-prj, from the sigma-prj/esp-12-e-adapter-pcb repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 53.3 × 20.3 mm with 3 parts on 22 nets, routed with 129 tracks and 11 vias.

It is built around the ESP-12E. Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.

Main components

1

README

README.md

ESP-12E \ ESP-12F Adapter PCB Design

This repository contains set of Gerber files and KiCad source project for ESP-12E\ESP-12F adapter PCB. Presented PCB allows ESP-12-E\F modules to be plugged into breadboard.

Requirements and Dependencies

Project is built using KiCad version 5.0.2

Typical Connection Schema

In order to build and run projects on this module the following connection schema can be used:

ESP-12E Connection Schema

Schema above represents the way how ESP module should be connected in order to run uploaded application. In case of application needs to be flashed into ESP chip - the corresponding GPIO 0 pin needs to be pulled down.

License

ESP-12E \ ESP-12F Adapter PCB Design by www.sigmaprj.com

text
To the extent possible under law, the person who associated CC0 with
'ESP-12E \ ESP-12F Adapter PCB Design' has waived all copyright and related or neighboring rights
to 'ESP-12E \ ESP-12F Adapter PCB Design'

You should have received a copy of the CC0 legalcode along with this
work.  If not, see <http://creativecommons.org/publicdomain/zero/1.0/>.

Parts

3
QtyValueFootprintReferences
2Conn_01x11Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_VerticalJ1, J2
1ESP-12ERF_Module:ESP-12EU1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers30 × 65 mmHardpass pcb, the printed circuit board in 3D

    Hardpass pcb

    girst/hardpass-passwordmanager-mirror-of-git.gir.st

    https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.

    34 parts101GPL-3.0
  • 2 layers82.5 × 22.4 mmWindow Sensor, the printed circuit board in 3D

    Window Sensor

    MakerMeik/Window-Sensor

    Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w

    19 parts67
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51

Questions

How big is the Esp 12e proto board PCB?

It measures 53.3 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp 12e proto board use?

3 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp 12e proto board KiCad files?

From the sigma-prj/esp-12-e-adapter-pcb repository on GitHub, at the commit this page was made from: the board is kicad/esp_12e_proto_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp 12e proto board design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).