Skip to the content
4 layers30 × 22 mmNINA W156-WIFI, the printed circuit board in 3D
Size
30 × 22 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
44
Pads
110
Tracks, vias
190, 52
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jan 2025
Updated
3 Feb 2025

Overview

NINA W156-WIFI is an open-source printed circuit board by sidprice, from the sidprice/Wi-Fi-Module-Adapter repository on GitHub. It is a 4-layer board of 30 × 22 mm with 15 parts on 44 nets, routed with 190 tracks and 52 vias.

It is built around the NINA-W156-04B and SC16IS741AIPWJ. Its parts include 6 resistors, 2 capacitors, 2 ICs, 1 diode and 1 connector. It belongs with the radio and wireless boards of this library.

Main components

2

README

README.md

Wi-Fi-Module-Adapter

Parts

15
QtyValueFootprintReferences
3220RResistor_SMD:R_0603_1608MetricR1, R2, R3
347KResistor_SMD:R_0603_1608MetricR4, R5, R6
210pF/10VCapacitor_SMD:C_0603_1608MetricC1, C2
11MM-HU-D06-VS-00-H-TBPsjp_connectors:02x06 1mm pitch header 1MM-HU-D06-VS-00-H-TBPJ1
1Crystal_GND24_Smallsjp_misc:ECS-240-8-36B2-CKMY1
1KRTB_LSLPS1.32sjp_leds:KRTB_LSLPS1.32LED1
1NINA-W156sjp_modules:NINA_LGA48R_1400X1000X223_PCBU1
1SC16IS741AIPWsjp_tssop:SOP65P640X110-16NIC1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP3
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1

More from sidprice/Wi-Fi-Module-Adapter

2

Similar boards

  • 2 layers92.5 × 87.7 mmMAG Plus, the printed circuit board in 3D

    MAG Plus

    spel-uchile/S2_S3_PS_MAG_PCBs

    A summary of the different MAG derived PCBs used in SUCHAI 2, SUCHAI 3 and Plansat Satellites

    131 parts
  • 4 layers29 × 50.3 mmLg hvac esp32, the printed circuit board in 3D

    Lg hvac esp32

    JanM321/esphome-lg-controller

    Wired controller for LG HVAC units using ESPHome and ESP32

    15 parts2920BSD
  • 4 layers33.5 × 49 mmProbecard mmcx, the printed circuit board in 3D

    Probecard mmcx

    azonenberg/starshipraider

    Open hardware test equipment

    15 parts193BSD-3-Clause
  • 4 layers28.3 × 54 mmPCB2, the printed circuit board in 3D

    PCB2

    lukasloetkolben/OpenpilotHardware

    Welcome to the Openpilot Hardware Collection!

    15 parts95MIT
  • 4 layers59 × 32 mmCp pi if fit shield, the printed circuit board in 3D

    Cp pi if fit shield

    niklasekstrom/clockport_pi_interface

    Amiga clock port to Raspberry Pi interface

    15 parts61GPL-3.0
  • 4 layers19.5 × 10.5 mmUniversalStepDown, the printed circuit board in 3D

    UniversalStepDown

    RoboticsBrno/RB0005-UniversalStepDown

    Universal step-down module

    15 parts26CC-BY-SA-4.0
  • 4 layers58.4 × 67.3 mmPico de gallo, the printed circuit board in 3D

    Pico de gallo

    OpenDevicePartnership/pico-de-gallo

    A tool for testing Embedded Rust drivers for discrete I2C/SPI components.

    15 parts21MIT

Questions

How big is the NINA W156-WIFI PCB?

It measures 30 × 22 mm and has 4 copper layers, 1.6 mm thick.

What parts does the NINA W156-WIFI use?

15 parts, built around the NINA-W156-04B and SC16IS741AIPWJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NINA W156-WIFI KiCad files?

From the sidprice/Wi-Fi-Module-Adapter repository on GitHub, at the commit this page was made from: the board is uBlox/uBlox-NINA-W156-hardware/NINA-W156-WIFI.kicad_pcb and its schematic base-adapter/base-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NINA W156-WIFI design in my own project?

Its repository states no licence, so its author keeps all rights: ask sidprice before reusing the design.