Skip to the content
2 layers42 × 27 mmSTM 32, the printed circuit board in 3D

This repository contains the complete submission for the internship assessment, covering both hardware (PCB design) and software (embedded C coding) tasks.

Size
42 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
52
Pads
114
Tracks, vias
182, 7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2025
Updated
9 Oct 2025

Overview

STM 32 is an open-source printed circuit board by SID-nakati, from the SID-nakati/PCB-Designer-Intern-Assessment- repository on GitHub. It is a 2-layer board of 42 × 27 mm with 21 parts on 52 nets, routed with 182 tracks and 7 vias.

Its parts include 6 capacitors, 5 resistors, 1 IC, 1 diode and 1 crystal. It belongs with the STM32 boards of this library.

README

README.md

PCB-Designer-Intern-Assessment-

This repository contains the complete submission for the internship assessment, covering both hardware (PCB design) and software (embedded C coding) tasks.

  1. Hardware - STM32 PCB Module Design:

  • The PCB design was created using KiCad.
  • The module is based on the STM32G series MCU.
  • It includes:
    • SuperSpeed USB-C connector for power delivery and data transfer.
    • 4-pin SWD debugger connector.
    • Two 4-pin connectors for sensors (I2C and UART).
    • One LED connected to a GPIO pin for board bring-up.
  • All the required files for the PCB design are located in the "hardware" folder.
  • This folder contains:
    • Schematic design files (.kicad_sch)
    • PCB layout files (.kicad_pcb)
    • Symbol and footprint libraries
    • Gerber files for manufacturing
    • Bill of Materials (BOM)
    • Electrical Rule Check (ERC) and Design Rule Check (DRC) report files
  1. Software - Embedded C / C++ Projects:

  • The "software" folder contains:
    • A C++ program file to reverse the words in a string.
    • A C++ program file to blink an LED at three different speeds in a continuous cycle.
    • A video demonstrating the LED blinking simulation on Tinkercad.

All source codes are well commented explaining the key logic.


Thank you for reviewing my submission.

Parts

21
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_0805_2012MetricC1, C2
222uFCapacitor_SMD:C_0805_2012MetricC4, C6
24.7kResistor_SMD:R_0805_2012MetricR4, R5
25.1kResistor_SMD:R_0805_2012MetricR1, R2
2MountingHoleMountingHole:MountingHole_2.1mmH1, H2
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
120pFCapacitor_SMD:C_0805_2012MetricC5
120pfCapacitor_SMD:C_0805_2012MetricC3
1330Resistor_SMD:R_0805_2012MetricR3
1I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalI2C
1LEDLED_SMD:LED_0805_2012MetricD1
1STM32G0B1CBTxPackage_QFP:LQFP-48_7x7mm_P0.5mmSTM32
1SWD DebuggerConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalSWD
1UARTConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalUART
1USB 2.0Connector_USB:USB_C_Receptacle_GCT_USB4085USB
1Voltage RegulatorPackage_TO_SOT_SMD:SOT-223-3_TabPin2U2

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the STM 32 PCB?

It measures 42 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STM 32 use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM 32 KiCad files?

From the SID-nakati/PCB-Designer-Intern-Assessment- repository on GitHub, at the commit this page was made from: the board is Hardware/STM 32.kicad_pcb and its schematic Hardware/STM 32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM 32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask SID-nakati before reusing the design.