Skip to the content
2 layers42 × 79 mmESP32-Solar Battery, the printed circuit board in 3D

This is a hobby project on ESP32

Size
42 × 79 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
52
Pads
203
Tracks, vias
328, 302
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Sep 2019
Updated
21 May 2025

Overview

ESP32-Solar Battery is an open-source printed circuit board by sicrisembay, from the sicrisembay/ESP32-Solar-Battery repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 79 mm with 56 parts on 52 nets, routed with 328 tracks and 302 vias.

It is built around the ESP32-WROOM-32D, CN3801 and LMV331TP, with the SSM3J332R,LF, BZT52C3V9 and MUN2211T1 among its other parts. Its parts include 18 resistors, 14 capacitors, 8 connectors, 5 diodes and 4 ICs. It belongs with the power boards and the ESP32 boards of this library.

Main components

8

Parts

56
QtyValueFootprintReferences
60.1uFCapacitor_SMD:C_0603_1608MetricC201, C204, C205, C210, C211, C403
410uFCapacitor_SMD:C_0603_1608MetricC202, C203, C401, C402
322uFCapacitor_SMD:C_0603_1608MetricC207, C208, C209
3SSM3J332RESP32-Solar-Battery:SOT95P240X88-3NQ201, Q202, Q203
2100Resistor_SMD:R_0603_1608MetricR301, R302
2100K 1%Resistor_SMD:R_0603_1608MetricR202, R204
2680KResistor_SMD:R_0603_1608MetricR212, R214
2Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ402, J403
10.1Resistor_SMD:R_2512_6332MetricR210
10.22uFCapacitor_SMD:C_0603_1608MetricC206
110KResistor_SMD:R_0603_1608MetricR401
1120Resistor_SMD:R_0603_1608MetricR209
11KResistor_SMD:R_0603_1608MetricR207
1200KResistor_SMD:R_0603_1608MetricR206
1220Resistor_SMD:R_0603_1608MetricR402
130K 1%Resistor_SMD:R_0603_1608MetricR205
139KResistor_SMD:R_0603_1608MetricR211
139K 1%Resistor_SMD:R_0603_1608MetricR213
147uHInductor_SMD:L_Taiyo-Yuden_NR-80xx_HandSolderingL201
18.2KResistor_SMD:R_0603_1608MetricR208
18.2K 1%Resistor_SMD:R_0603_1608MetricR203
1BZT52C3V9Diode_SMD:D_SOD-123D1
1CN3801Package_SO:SSOP-10_3.9x4.9mm_P1.00mmU202
1DNP 10KResistor_SMD:R_0603_1608MetricR201
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32U401
1FuseConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalF201
1IMP810SPackage_TO_SOT_SMD:SOT-23U203
1LEDLED_SMD:LED_0603_1608MetricD401
1LMV331Package_TO_SOT_SMD:SOT-23-5U201
1LOADConnector_JST:JST_VH_B2P-VH_1x02_P3.96mm_VerticalJ206
1LOGOESP32-Solar-Battery:sicrisG***
1LiFePo4_BattConnector_JST:JST_VH_B2P-VH_1x02_P3.96mm_VerticalJ203
1MUN2211T1Package_TO_SOT_SMD:SC-59Q1
1NTC 10K B=3950KConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ201
1ProgramConnector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_VerticalJ301
1REDLED_SMD:LED_0603_1608MetricD201
1SD103AWDiode_SMD:D_SOD-123D203
1SS56ESP32-Solar-Battery:SOD-128D204
1SolarPanelConnector_JST:JST_VH_B2P-VH_1x02_P3.96mm_VerticalJ202
1jtagConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ302

More from sicrisembay/ESP32-Solar-Battery

1
  • 2 layers29 × 29 mmPower Meter, the printed circuit board in 3D

    Power Meter

    sicrisembay/ESP32-Solar-Battery

    This is a hobby project on ESP32

    17 partsMIT

Similar boards

  • 2 layers25.4 × 25.4 mmSolar esp32, the printed circuit board in 3D

    Solar esp32

    fadushin/solar-esp32

    Kicad sketches for solar charger for 3.2v LiFePo4 batteries

    31 parts42
  • 2 layers100 × 100 mmArrow deca retro cape, the printed circuit board in 3D

    Arrow deca retro cape

    somhi/DECA_retro_cape_2

    Retro cape (addon) for DECA FPGA

    79 parts5
  • 2 layers98 × 83.5 mmOsr cdi15x, the printed circuit board in 3D

    Osr cdi15x

    Rilassaru/osr-cdi

    High-performance AC-CDI for YAMAHA 2-stroke motorcycles

    93 parts7
  • 2 layers28.4 × 15.9 mmCH552-devkit, the printed circuit board in 3D

    CH552-devkit

    hexeguitar/CH552-devkit

    CH552 dev board with HW reboot into bootloader

    25 parts6MIT
  • 2 layers65.5 × 98 mmFloppy Board v3.1, the printed circuit board in 3D

    Floppy Board v3.1

    FloppyO1/Floppy_Boards

    Floppy Boards are a series of breakout boards for rapid prototyping which I developed as an alternative of Arduino.

    339 parts5CERN-OHL-S-2.0
  • 2 layers184 × 80 mmAdcboard, the printed circuit board in 3D

    Adcboard

    nuclearfutureslab/ibxII-hardware

    Hardware for IBX ][ - nuclear warhead verification with an Apple II

    126 parts5GPL-3.0
  • 2 layers300 × 53 mmBMW E30 Late Cluster SI, the printed circuit board in 3D

    BMW E30 Late Cluster SI

    Ansel84/BMW-E30-Gauge-Cluster-Late-Model

    This project is the documentation of reverse engineering the BMW E30 gauge cluster for post 1988 model years.

    118 parts2MIT
  • 2 layers90 × 40 mmPlate, the printed circuit board in 3D

    Plate

    BryceVandegrift/hot-plate

    A DIY PCB hot plate that uses through hole components

    30 parts1CERN-OHL-W-2.0

Questions

How big is the ESP32-Solar Battery PCB?

It measures 42 × 79 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-Solar Battery use?

56 parts, built around the ESP32-WROOM-32D, CN3801, LMV331TP and SSM3J332R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-Solar Battery KiCad files?

From the sicrisembay/ESP32-Solar-Battery repository on GitHub, at the commit this page was made from: the board is hardware/EE/design/kicad/ESP32-Solar-Battery/ESP32-Solar-Battery.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-Solar Battery design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).