
Stm32-snake controller
shuki25/stm32-snake-controller
A snake game controller board designed to use with WS2812B LED grid and SNES controller

Stm32-led strip controller is an open-source printed circuit board by shuki25, from the shuki25/stm32-led-strip-controller repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 75 × 38 mm with 58 parts on 75 nets, routed with 352 tracks and 72 vias.
It is built around the 74AHCT1G125SE, TPS564242DRL and AMS1117-3.3, with the IRM-H638T/TR2, M24C64-RMN6P and USBLC6-2SC6 among its other parts. Its parts include 22 capacitors, 10 resistors, 7 ICs, 4 connectors and 3 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C103, C104, C105, C106, C111, C114, C118, C302, C305 |
| 3 | 1K5 | Resistor_SMD:R_0603_1608Metric | R102, R109, R110 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C101, C102, C117 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C108, C109 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C112, C113 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C201, C202 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C303, C304 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H102, H104 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R103 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R301 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C301 |
| 1 | 15.4k | Resistor_SMD:R_0603_1608Metric | R303 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y101 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C107 |
| 1 | 2.2uH | User_Footprint:L_TDK_SPM6530 | L301 |
| 1 | 226k | Resistor_SMD:R_0603_1608Metric | R302 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R304 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y103 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R104 |
| 1 | 600@100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB101 |
| 1 | 74AHCT1G125 | Package_TO_SOT_SMD:SOT-23-5 | U103 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U201 |
| 1 | Barrel_Jack_Switch | User_Footprint:BarrelJack_GCT_DCJ250-10-A-K1-K | J102 |
| 1 | IRM-H638T/TR2 | User_Footprint:Everlight_IRM-H638T-TR2 | U105 |
| 1 | JST 2.54 Header | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J104 |
| 1 | JST 2.54 Header | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J106 |
| 1 | LOGO | User_Footprint:butler-electronics-10 | G*** |
| 1 | M24C64-RMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U104 |
| 1 | OLED_I2C | User_Footprint:OLED_128x32_I2C_4pins | OLED101 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F101 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | SP0505BAJT | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D104 |
| 1 | SS34 | Diode_SMD:D_SMA | D103 |
| 1 | STM32F401RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U101 |
| 1 | SW_Push | User_Footprint:XKB-Connectivity-TS-1187A-B-A-B | SW106 |
| 1 | TPS564242DRL | Package_TO_SOT_SMD:SOT-563 | U301 |
| 1 | Tag Connector | Connector_Tag:TC2030-IDC-NL | J101 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U102 |
The 56 most common of 58 parts.

shuki25/stm32-snake-controller
A snake game controller board designed to use with WS2812B LED grid and SNES controller

eurovibes/rack-ser-adapter
rack-ser-adapter is provided under the terms of the CERN-OHL-S license version 2 as provided in the LICENSES/CERN-OHL-S-2.0 file.

eurovibes/sertest-ng
Serial interfaces like RS-232, RS-422/485 or CAN bus are even used in this modern times. While reworking the 8250 driver in the Linux kernel jogness faced plethora of nasty hardware dedication with modern serial…


HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.


jackfrye/robohub_prototype_v1
ATSAMA based board for command and control of future robotics systems

bobbycar-graz/Telemetry-PCB
PCB with ESP32, CANbus, microSD, GPS and LoRa
It measures 75 × 38 mm and has 4 copper layers, 1.63 mm thick.
58 parts, built around the 74AHCT1G125SE, TPS564242DRL, AMS1117-3.3 and IRM-H638T/TR2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shuki25/stm32-led-strip-controller repository on GitHub, at the commit this page was made from: the board is stm32-led-strip-controller.kicad_pcb and its schematic buck_converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).