Skip to the content
2 layers43.8 × 40.3 mmSolder, the printed circuit board in 3D
Size
43.8 × 40.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
5
Pads
18
Tracks, vias
47, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Jun 2025
Updated
13 Jun 2025

Overview

Solder is an open-source printed circuit board by shubhisroking, from the shubhisroking/solder repository on GitHub. It is a 2-layer board of 43.8 × 40.3 mm with 15 parts on 5 nets, routed with 47 tracks and 2 vias.

Its parts include 2 diodes, 1 resistor and 1 switch.

README

README.md

Solder

Project Purpose

This project is a practice run to sharpen my soldering and PCB design skills before working on my custom Hackpad. I went through the guide very closely for this.

BOM

1x PCB 1x 3v Battery 1x photoresistor 2x LEDs 1x motor 1x potentiometer

Slack Username

Shubh

Screenshots

Schematic

image

PCB

image

3D View

image

Parts

15
QtyValueFootprintReferences
8LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***
2LEDLED_THT:LED_D5.0mmD1, D2
1Battery_CellBattery:BatteryHolder_Keystone_3034_1x20mmBT1
1Motor_DCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalM1
1R_PhotoOptoDevice:R_LDR_5.1x4.3mm_P3.4mm_VerticalR1
1R_PotentiometerPotentiometer_THT:Potentiometer_Vishay_T73YP_VerticalRV1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Solder PCB?

It measures 43.8 × 40.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Solder use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Solder KiCad files?

From the shubhisroking/solder repository on GitHub, at the commit this page was made from: the board is src/solder.kicad_pcb and its schematic src/ok.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Solder design in my own project?

Its repository states no licence, so its author keeps all rights: ask shubhisroking before reusing the design.