
Right Split
shubhamp2007/Wireless-Split-Keyboard
A ProMicro NRF52840 based Wireless Split Keyboard

A ProMicro NRF52840 based Wireless Split Keyboard
Keyboard is an open-source printed circuit board by shubhamp2007, from the shubhamp2007/Wireless-Split-Keyboard repository on GitHub. It is a 2-layer board of 340.8 × 96.5 mm with 169 parts on 123 nets, routed with 450 tracks and 79 vias.
Its parts include 70 diodes, 70 switches and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
A 70 key wireless split keyboard powered by ProMicro NRF52840 microcontroller, using KMK firmware.









| Qty | Value | Footprint | References |
|---|---|---|---|
| 70 | D | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +54 |
| 56 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW24, SW25 +40 |
| 13 | M2 | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13 |
| 5 | Break Off | Footprints:mouse-bite-5mm-slot | BO1, BO2, BO3, BO4, BO5 |
| 5 | Stablilizer | ScottoKeebs_Stabilizer:Stabilizer_MX_2.00u | STB1, STB2, STB3, STB4, STB5 |
| 4 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_1.25u | SW30, SW31, SW32, SW33 |
| 3 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_2.25u | SW23, SW55, SW64 |
| 2 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1, BT2 |
| 2 | Nice_Nano_V2 | ScottoKeebs_MCU:Nice_Nano_V2 | U1, U2 |
| 2 | SW_DIP_x01 | ScottoKeebs_Components:Switch_K3-1204D | SWD1, SWD2 |
| 2 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_1.50u | SW9, SW48 |
| 2 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_1.75u | SW16, SW61 |
| 1 | RotaryEncoder_Switch | ScottoKeebs_Scotto:Encoder_EC11_MX | SW41 |
| 1 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_2.00u | SW40 |
| 1 | SW_Push_45deg | ScottoKeebs_Hotswap:Hotswap_MX_2.75u | SW34 |

shubhamp2007/Wireless-Split-Keyboard
A ProMicro NRF52840 based Wireless Split Keyboard

shubhamp2007/Wireless-Split-Keyboard
A ProMicro NRF52840 based Wireless Split Keyboard

osiweb/unified_retro_keyboard
Project to provide keyboard replacements for various classic computers, as well as classic ASCII keyboard


NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

cbskii/storyboard-keyboard
5x12 split ortholinear keyboard with an E-INK display


yyevax/xavient-kbd
xavient is a thin split mechanical keyboard that does not sacrifice repairability and upgradablility. Inspired by the sleek design of the Corne-ish Zen but with hotswappalbe switches and components.

pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware

ymkn/YuTofu
YuTofu is an unofficial compatible PCB for the well-known custom keyboard Tofu60 2.0.
It measures 340.8 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
169 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shubhamp2007/Wireless-Split-Keyboard repository on GitHub, at the commit this page was made from: the board is PCB/keyboard.kicad_pcb and its schematic PCB/Left/Left_Split.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shubhamp2007 before reusing the design.