2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915
2 layers76.2 × 105.2 mm
Wireless Macropad
shubhamp2007/Wireless-Macropad1An ESP32 based Wireless Macropad with 16 Keys.
- Size
- 76.2 × 105.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 45
- Pads
- 152
- Tracks, vias
- 87, 22
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 27 Jun 2026
Overview
Wireless Macropad is an open-source printed circuit board by shubhamp2007, from the shubhamp2007/Wireless-Macropad repository on GitHub. It is a 2-layer board of 76.2 × 105.2 mm with 35 parts on 45 nets, routed with 87 tracks and 22 vias.
Its parts include 16 diodes, 16 switches, 2 connectors and 1 IC. It belongs with the keyboards and input boards and the ESP32 boards of this library.
README
README.mdWireless Macropad
An ESP32 Devkit powered Wireless Macropad featuring 16 keys in a 4x4 matrix and 0.91 inch SSD1306 Display with 3.7 V Battery for powering the ESP32.
Features
- 16 Switches
- 128x32 OLED Display
- 3.7V 1000 MAh Battery
Purpose
I have already made a couple of Macropads but they were all wired. There were a few problems I faced with them particularly when using with my laptop on my study table, the keyboard, mouse and charging cables are already a mess and then adding Macropad cable, I get fed up, so I made this to replace my wired Macropad.
BOM
Schematic
Battery Connection
PCB
Images
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | D | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | SW_Push | ScottoKeebs_MX:MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 1 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | ESP32-DevKit_1 | Espressif:ESP32-DevKit_1 | U1 |
| 1 | OLED_128x32 | ScottoKeebs_Components:OLED_128x32 | J2 |
Questions
How big is the Wireless Macropad PCB?
It measures 76.2 × 105.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wireless Macropad use?
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wireless Macropad KiCad files?
From the shubhamp2007/Wireless-Macropad repository on GitHub, at the commit this page was made from: the board is PCB/Wireless Macropad.kicad_pcb and its schematic PCB/Wireless Macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wireless Macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask shubhamp2007 before reusing the design.
Similar boards
- 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
- 2 layers50.5 × 67.1 mm
