
Final.
Shri-2112/Flexsonic
plaintext Flexsonic ├── .obsidian/ # Notes (Obsidian workspace) │ └── Pre-requisites.md # Basic notes │ ├── audio/ # All audio files in use │ ├── build/ # ESP-IDF build output │ ├── datacollection/ # Raw data logging +…

plaintext Flexsonic ├── .obsidian/ # Notes (Obsidian workspace) │ └── Pre-requisites.md # Basic notes │ ├── audio/ # All audio files in use │ ├── build/ # ESP-IDF build output │ ├── datacollection/ # Raw data logging +…
Flexsonic 2 is an open-source printed circuit board by Shri-2112, from the Shri-2112/Flexsonic repository on GitHub. It is a 2-layer board of 45 × 22.3 mm with 12 parts on 18 nets, routed with 37 tracks and 6 vias.
Its parts include 6 connectors, 1 resistor, 1 diode and 1 switch.
A wearable assistive device that translates hand gestures into audible speech using flex sensors, IMU, ESP32, and DFPlayer Mini.
FlexSonic aims to bridge the communication gap for speech-impaired individuals by converting hand gestures into audible phrases.
The glove uses flex sensors (to detect finger bending) and an MPU6050 IMU (to capture orientation). Sensor data is processed on an ESP32, which runs a simple ML model (K-Means clustering) to classify gestures. The recognized gesture is mapped to a pre-recorded audio file on a DFPlayer Mini, producing real-time speech output through a speaker.
Hardware:
Software:
Frameworks/Tools:
Flexsonic
├── .obsidian/ # Notes (Obsidian workspace)
│ └── Pre-requisites.md # Basic notes
│
├── audio/ # All audio files in use
│
├── build/ # ESP-IDF build output
│
├── data_collection/ # Raw data logging + visualization
│ ├── data.py # Data logging script
│ ├── data.txt # Raw dataset (text format)
│ ├── graph.py # Graphical representation of dataset
├── data_processed/ # Processed dataset
│ ├── data_with_clusters.csv # Clustered dataset
│ ├── gesture_labeled.csv # Labeled dataset
│ └── gesture_parsed.csv # Parsed dataset
│
├── main/ # ESP32 firmware (C code)
│ ├── 1_flex.c
│ ├── 2_mpu.c
│ ├── 3_mpu_and_flex.c
│ ├── 4_sentence_gesture.c
│ └── 5_numbers_gesture.c- **ESP-IDF v4.0+** (or Arduino IDE with ESP32 boards installed)
- **Python 3.8+** Required libraries (Arduino/ESP32):
esp32 board support packageAdafruit_MPU6050DFRobotDFPlayerMiniClone the repo:
git clone https://github.com/your_username/flexsonic.git
cd flexsonicFollow these steps to run and test the project:
Connect Hardware
Upload Code
Run the Project
Add New Gestures
main.cpp..mp3) to the SD card in sequential numbering (e.g., 0001.mp3, 0002.mp3).Testing
You can check out the project demo here:
Here are some common issues and their solutions:
No audio output from DFPlayer Mini
0001.mp3, 0002.mp3).ESP32 not detecting flex sensors
IMU (MPU6050) giving unstable readings
Code not compiling
DFRobotDFPlayerMini, Wire, etc.).Gestures not recognized correctly
This project was made possible with the efforts of:
Contributions are always welcome!
Feel free to fork this repo, create a branch, and submit a pull request.
A big thank you to:
Here are some references and tools that helped during development:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J7 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 5Vinput_Df | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | 5voutput | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | logos:sra_logo_small_neg | G*** |
| 1 | LOGO | Logos:Lions_logo | G*** |
| 1 | LOGO | logos:sra_skull_big | G*** |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | Speaker | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | Uart_tx_rx | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |

Shri-2112/Flexsonic
plaintext Flexsonic ├── .obsidian/ # Notes (Obsidian workspace) │ └── Pre-requisites.md # Basic notes │ ├── audio/ # All audio files in use │ ├── build/ # ESP-IDF build output │ ├── datacollection/ # Raw data logging +…

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 45 × 22.3 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Shri-2112/Flexsonic repository on GitHub, at the commit this page was made from: the board is PCBs/Flexsonic_2.kicad_pcb and its schematic Schematics/Final..kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Shri-2112 before reusing the design.