2 layers51.7 × 79.4 mm
Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver
26 parts5GPL-2.0
2 layers60 × 50 mm
Atmega328p pcb
shivam-dev07/atmega328p-breakoutATmega328P Breakout Board - KiCad PCB Design
- Size
- 60 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 28
- Pads
- 94
- Tracks, vias
- 75, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Jun 2026
- Updated
- 23 Jun 2026
Overview
Atmega328p pcb is an open-source printed circuit board by shivam-dev07, from the shivam-dev07/atmega328p-breakout repository on GitHub. It is a 2-layer board of 60 × 50 mm with 12 parts on 28 nets, routed with 75 tracks and 5 vias.
It is built around the ATMEGA328P-PU and LM7805. Its parts include 4 capacitors, 3 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 2 | 22pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 16MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | ATmega328P-PU | DIP-28_W15.24mm | U1 |
| 1 | GPIO-LEFT | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | GPIO-RIGHT | PinHeader_2x10_P2.54mm_Vertical | J3 |
| 1 | ICSP | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LM7805 | TO-220-3_Vertical | VR1 |
| 1 | RESET | KSA_Tactile_SPST | SW1 |
Questions
How big is the Atmega328p pcb PCB?
It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atmega328p pcb use?
12 parts, built around the ATMEGA328P-PU and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atmega328p pcb KiCad files?
From the shivam-dev07/atmega328p-breakout repository on GitHub, at the commit this page was made from: the board is atmega328p-pcb.kicad_pcb and its schematic atmega328p-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atmega328p pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask shivam-dev07 before reusing the design.
Similar boards
- 2 layers256.5 × 172.9 mm
- 2 layers239.3 × 121.3 mm
- 2 layers84.2 × 86.4 mm
Thesis custom arduino board
lonapse456-glitch/ulang_sys_res
System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn
41 parts1 - 2 layers273.9 × 208.8 mm
Placa todo en uno
NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).
50 parts1 - 2 layers63.8 × 75 mm
- 2 layers100 × 90 mm
Entrenador atmega328p
davixcky/entrenador-atmega328p
Entrenador de microcontroladores con ATMega328P (DIP) - Sistemas Embebidos 1, actividad 10.1.12
75 parts - 2 layers68 × 53 mm
