Receiver6 rep
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
Code for Bluetooth Low Energy bee tracking system
Receiver6 is an open-source printed circuit board by SheffieldMLtracking, from the SheffieldMLtracking/BLETrack repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 11.8 × 39.2 mm with 8 parts on 12 nets, routed with 101 tracks and 3 vias.
Its parts include 1 capacitor, 1 IC, 1 connector and 1 crystal. It belongs with the radio and wireless boards of this library.
Code for Bluetooth Low Energy bee tracking system.
NOTE: P0.31 is used for encoder output A, P0.30 for encoder output B and P0.11 for hall effect sensor input.
btle.advertising_header.pdu_type == 0x01 && !_ws.expert && btle.advertising_address == 80:ea:ca:70:00:04
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | , , | ||
| 1 | BAT_MS412FE-FL26E | MS412FE-FL26E:BAT_MS412FE-FL26E | A1 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | Conn_01x08_Pin | Library:FPC_1x08_P1.00mm_plug_3mm | J1 |
| 1 | Crystal_GND24 | Library:Crystal_SMD_Abracon_ABM13W-4Pin_1.2x1.0mm | Y1 |
| 1 | DA14531_17-ball_WLCSP | Library:DA14531_17-ball_WLCSP | U1 |
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 11.8 × 39.2 mm and has 2 copper layers, 0.2 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SheffieldMLtracking/BLETrack repository on GitHub, at the commit this page was made from: the board is Tag PCBs/Tag PCBs with Printed Antenna/Button Battery/receiver6.kicad_pcb and its schematic Tag PCBs/2026 Tag Designs/Flat LED Tag 44uF Caps/Flat LED Tag/flatLEDtag/flatLEDtag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).