Receiver6 rep
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
Code for Bluetooth Low Energy bee tracking system
Receiver6 is an open-source printed circuit board by SheffieldMLtracking, from the SheffieldMLtracking/BLETrack repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 11.8 × 8.9 mm with 9 parts on 12 nets, routed with 103 tracks and 3 vias.
Its parts include 2 capacitors, 1 IC, 1 connector and 1 crystal. It belongs with the radio and wireless boards of this library.
Code for Bluetooth Low Energy bee tracking system.
NOTE: P0.31 is used for encoder output A, P0.30 for encoder output B and P0.11 for hall effect sensor input.
btle.advertising_header.pdu_type == 0x01 && !_ws.expert && btle.advertising_address == 80:ea:ca:70:00:04
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | CP3225A | Library:CAPCP3225X100N_improved | C2 |
| 1 | Conn_01x08_Pin | Library:FPC_1x08_P1.00mm_plug_3mm | J1 |
| 1 | Crystal_GND24 | Library:Crystal_SMD_Abracon_ABM13W-4Pin_1.2x1.0mm | Y1 |
| 1 | DA14531_17-ball_WLCSP | Library:DA14531_17-ball_WLCSP | U1 |
| 1 | SolderWirePad_1x01_SMD_1x2mm | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | A1 |
The 6 most common of 9 parts.
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system
SheffieldMLtracking/BLETrack
Code for Bluetooth Low Energy bee tracking system



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
It measures 11.8 × 8.9 mm and has 2 copper layers, 0.2 mm thick.
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SheffieldMLtracking/BLETrack repository on GitHub, at the commit this page was made from: the board is Tag PCBs/rec8/receiver6.kicad_pcb and its schematic Tag PCBs/2026 Tag Designs/Flat LED Tag 44uF Caps/Flat LED Tag/flatLEDtag/flatLEDtag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).