
Keypad 2Sides
shaqeebmomen/MacroPad
Keypad project with lightup keys and programmable macros per key

Keypad project with lightup keys and programmable macros per key
Keypad is an open-source printed circuit board by shaqeebmomen, from the shaqeebmomen/MacroPad repository on GitHub. It is a 2-layer board of 82 × 115 mm with 36 parts on 35 nets, routed with 280 tracks and 0 vias.
It is built around the 24AA16H-I/P. Its parts include 12 diodes, 4 capacitors and 2 resistors. It belongs with the keyboards and input boards and the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | SW_Push | LocalModdedFootprints:SW_Cherry_MX_1.00u_LEDHOLE | Col0_Row0, Col0_Row1, Col0_Row2, Col0_Row3, Col1_Row0, Col1_Row1, Col1_Row2, Col1_Row3, Col2_Row0, Col2_Row1, Col2_Row2, Col2_Row3 |
| 4 | C | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1, C2, C3, C4 |
| 2 | R_US | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 24AA16H-I/P | Memory_EEPROM_local:24AA16H-I&slash_P | Memory1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | 5V_power1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LED_Header1 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | OLED_Header1 |
| 1 | SW_Push | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | USER_BTN1 |
| 1 | SeeeduinoXIAO | Seeeduino Xiao:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | MCU1 |

shaqeebmomen/MacroPad
Keypad project with lightup keys and programmable macros per key

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 82 × 115 mm and has 2 copper layers, 1.58 mm thick.
36 parts, built around the 24AA16H-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shaqeebmomen/MacroPad repository on GitHub, at the commit this page was made from: the board is Elec/Keypad/Keypad.kicad_pcb and its schematic Elec/Keypad/2sidedTest/2sidedTest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shaqeebmomen before reusing the design.