Skip to the content
2 layersHackPad, the printed circuit board in 3D

CoolerHackPad is a 6-key Hackpad designed as a DIY alternative to a Stream Deck rather than a standard keyboard. VIA support is planned for a future update to make it a fully customizable macro pad.

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
14
Pads
44
Tracks, vias
42, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Sep 2026
Updated
26 Sep 2026

Overview

HackPad is an open-source printed circuit board by shanmugamakash-alt, from the shanmugamakash-alt/CoolerHackPad repository on GitHub, published under the MIT licence. It is a 2-layer board with 7 parts on 14 nets, routed with 42 tracks and 0 vias.

Its parts include 6 switches and 1 IC.

README

README.md

CoolerHackPad

CoolerHackPad is a 6-key Hackpad designed as a DIY alternative to a Stream Deck rather than a standard keyboard. VIA support is planned for a future update to make it a fully customizable macro pad.


Features

  • Switches: 6x Cherry MX-compatible key switches
  • Firmware: QMK support (VIA support coming soon)
  • Enclosure: 2-piece case (Top cover and Base)
  • Design: Custom ventilation cutouts and styled USB port opening

3D Model

The case was modeled in Fusion 360 and consists of two parts:

  • Base: Holds the PCB, switches, and microcontroller. Fits together using M3 screws threaded directly into the plastic.
  • Top Cover: Features cutouts for the key switches and ventilation holes for the PCB.

Note: Parts of the case will be painted white to match the intended design aesthetic.

3D Model


PCB

Schematics

image

PCB Design

image

Designed in KiCad.


Development Notes

This project was built entirely from scratch. AI assistance was used for software navigation and documentation reference—specifically for locating tools in KiCad and Fusion 360 (e.g., finding the move tool in Fusion 360, creating edge cutouts in KiCad) and formatting the QMK keymap.c firmware file. All hardware designs, 3D models, and code implementation were created independently.

Parts

7
QtyValueFootprintReferences
6SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

What parts does the HackPad use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HackPad KiCad files?

From the shanmugamakash-alt/CoolerHackPad repository on GitHub, at the commit this page was made from: the board is PCB FILES/HackPad.kicad_pcb and its schematic PCB FILES/HackPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HackPad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).