
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Circuit board for a custom hotrod shift indicator.
TR2-Shifter is an open-source printed circuit board by shanereetz, from the shanereetz/TR2-Shifter repository on GitHub. It is a 2-layer board of 70 × 30 mm with 28 parts on 27 nets, routed with 152 tracks and 6 vias.
Its parts include 16 resistors and 2 ICs.
A circuit board design for a custom hotrod gear indicator. Designed in KiCad.
The car is a lakester-style Model A Ford hotrod, with a Pontiac Solstice ECOTEC swap. It uses an automatic transmission and a highly modified ECU, and as a result there's no obvious indication of what gear you're in. This project is an attempt to solve that by optical means, largely separate from the rest of the car's electronics (except DC power input). This concept and the other fabrication work is done by Vice Chief http://www.vicechief.com
An off-board buck converter steps 12V from the car down to 5V.
A single IR LED is connected to the gear shift handle.
An array of IR detectors sits along the base of the shifter. As the emitter passes over different diodes, LEDs on a separate panel illuminate to indicate which gear the car is in.
This board powers the above components, and uses two LM339 Voltage Comparators to illuminate the LEDs.
A potentiometer is used to set a reference voltage for the comparators.
2 - LM339 Voltage Comparators, 14pin DIP
2 - JST 14pin PHD connectors
2 - JST 2pin PH connectors
1 - 3mm LED (power on)
1 - small potentiometer
Board design by Shane Reetz. 2021.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1KΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4, R5, R6, R7, R8, R9 |
| 5 | 22KΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R13, R14, R15, R16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 4.7KΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11, R12 |
| 2 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | +5VDC, IR LED |
| 2 | Conn_02x07_Odd_Even | Connector_JST:JST_PHD_S14B-PHDSS_2x07_P2.00mm_Horizontal | IR REC. ARRAY, LED PANEL |
| 2 | LM339_DIP | Package_DIP:DIP-14_W7.62mm_Socket | U1 - LM339, U2 - LM339 |
| 1 | 470Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | POWER ON | LED_THT:LED_D3.0mm | POWER ON |
| 1 | R_Potentiometer_Trim_US | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | V REF |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shanereetz/TR2-Shifter repository on GitHub, at the commit this page was made from: the board is TR2_shifter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shanereetz before reusing the design.