Skip to the content
2 layers70 × 30 mmTR2-Shifter, the printed circuit board in 3D

Circuit board for a custom hotrod shift indicator.

Size
70 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
27
Pads
101
Tracks, vias
152, 6
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
9 Jan 2021
Updated
3 Feb 2021

Overview

TR2-Shifter is an open-source printed circuit board by shanereetz, from the shanereetz/TR2-Shifter repository on GitHub. It is a 2-layer board of 70 × 30 mm with 28 parts on 27 nets, routed with 152 tracks and 6 vias.

Its parts include 16 resistors and 2 ICs.

README

README.md

TR2-Shifter

A circuit board design for a custom hotrod gear indicator. Designed in KiCad.

Problem

The car is a lakester-style Model A Ford hotrod, with a Pontiac Solstice ECOTEC swap. It uses an automatic transmission and a highly modified ECU, and as a result there's no obvious indication of what gear you're in. This project is an attempt to solve that by optical means, largely separate from the rest of the car's electronics (except DC power input). This concept and the other fabrication work is done by Vice Chief http://www.vicechief.com

How this solution works

An off-board buck converter steps 12V from the car down to 5V.

A single IR LED is connected to the gear shift handle.

An array of IR detectors sits along the base of the shifter. As the emitter passes over different diodes, LEDs on a separate panel illuminate to indicate which gear the car is in.

This board powers the above components, and uses two LM339 Voltage Comparators to illuminate the LEDs.

A potentiometer is used to set a reference voltage for the comparators.

Parts list (unfinished)

2 - LM339 Voltage Comparators, 14pin DIP

2 - JST 14pin PHD connectors

2 - JST 2pin PH connectors

1 - 3mm LED (power on)

1 - small potentiometer

Board design by Shane Reetz. 2021.

Parts

28
QtyValueFootprintReferences
71KΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3, R4, R5, R6, R7, R8, R9
522KΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R13, R14, R15, R16
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
34.7KΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR10, R11, R12
2Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical+5VDC, IR LED
2Conn_02x07_Odd_EvenConnector_JST:JST_PHD_S14B-PHDSS_2x07_P2.00mm_HorizontalIR REC. ARRAY, LED PANEL
2LM339_DIPPackage_DIP:DIP-14_W7.62mm_SocketU1 - LM339, U2 - LM339
1470ΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
1POWER ONLED_THT:LED_D3.0mmPOWER ON
1R_Potentiometer_Trim_USPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalV REF

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the TR2-Shifter PCB?

It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TR2-Shifter use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TR2-Shifter KiCad files?

From the shanereetz/TR2-Shifter repository on GitHub, at the commit this page was made from: the board is TR2_shifter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TR2-Shifter design in my own project?

Its repository states no licence, so its author keeps all rights: ask shanereetz before reusing the design.