
2x2 antenna
shanayasb/debriscout
Code for capstone project - FPGA based debris detection w/ camera & radar

Code for capstone project - FPGA based debris detection w/ camera & radar
RadarCircuit is an open-source printed circuit board by shanayasb, from the shanayasb/debriscout repository on GitHub. It is a 2-layer board of 50 × 50 mm with 85 parts on 46 nets, routed with 446 tracks and 40 vias.
It is built around the BGT24LTR11N16E6327XTSA1, LP5907MFX-3.3 and TXB0102DCU, with the BSS223PW-VB among its other parts. Its parts include 40 resistors, 29 capacitors, 5 ICs, 1 transistor and 1 connector.
Code for capstone project - FPGA based debris detection w/ camera & radar
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R10, R12, R13, R14, R36, R37, R38, R39, R40 |
| 7 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | 1V65, 3V3, 5V, T3, T4, TP5, TP6 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R11 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C9, C13, C14 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C16, C18, C27 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R22, R27 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R17, R18, R19 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R25, R28, R31 |
| 4 | 5.6n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C21, C22 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C6 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R33, R34 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R30 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C29 |
| 2 | 130p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C19 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C26 |
| 2 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R29 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C25 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32, R35 |
| 2 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C20 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | Antenna | PatchAntennas:Patch | AE1, AE2 |
| 2 | TLV9002SIDGSR | TLV9002:DGS10_TEX | U3, U5 |
| 1 | 16k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | BGT24LTR11N16E6327XTSA1 | BGT24LTR11N16:TSNP-16-9_INF | U1 |
| 1 | BSS223PW | BSS223PW:PG-SOT-323_INF | Q1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TXB0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U2 |

shanayasb/debriscout
Code for capstone project - FPGA based debris detection w/ camera & radar

zbwu/cyberdog_misc
Demultiplexing "Download" Type-C port to Console, Recovery USB and Recovery Button

PyroVision-ThermalCam/Mainboard
Mainboard for the PyroVision thermal camera.

RemkoPr/airo-halberd
The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.

Fabiancrg/acw02_zb
See the documentation files for advanced features, troubleshooting, and hardware details.

drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel

agenticaiuw/hivemind
Unified monorepo for the Agentic Gadget hardware, firmware, local agent, cloud relay, and Bluetooth audio bridge.

Kampi/IoT-Gateway
Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.

petnica-rac-seminari/BCD-0o27-Tetris
The BalcCon Cyberdeck 0o27 (BCD-0o27) comes with a development framework that makes it easier to add functionality to the cyberdeck.
It measures 50 × 50 mm and has 2 copper layers, 0.6 mm thick.
85 parts, built around the BGT24LTR11N16E6327XTSA1, LP5907MFX-3.3, TXB0102DCU and BSS223PW-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shanayasb/debriscout repository on GitHub, at the commit this page was made from: the board is kicad_electronics/radarCircuit/radarCircuit.kicad_pcb and its schematic kicad_electronics/2x2_antenna/2x2_antenna.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shanayasb before reusing the design.