

KiCAD Tutorial Roborear
Project files for Roborear's free KiCAD course on YouTube.
- Size
- 42 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 4
- Pads
- 8
- Tracks, vias
- 8, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Oct 2026
- Updated
- 19 Oct 2026
Overview
KiCAD Tutorial Roborear is an open-source printed circuit board by shahrear-ab, from the shahrear-ab/Roborear-KiCAD-Tutorial repository on GitHub. It is a 2-layer board of 42 × 52 mm with 5 parts on 4 nets, routed with 8 tracks and 1 via.
Its parts include 1 resistor, 1 diode and 1 switch.
README
README.mdRoborear KiCAD Tutorial
Project files for Roborear's free KiCAD course on YouTube.
The project is a simple circuit: a 3 V coin-cell battery (CR2032) drives a red LED through a 220 Ω resistor, with a DPST switch to turn it on and off. It covers the full workflow, from schematic to PCB layout to Gerber export.
Contents
| File / Folder | Description |
|---|---|
KiCAD_Tutorial_Roborear.kicad_pro | KiCad project file (open this) |
KiCAD_Tutorial_Roborear.kicad_sch | Schematic |
KiCAD_Tutorial_Roborear.kicad_pcb | PCB layout |
Roborear_BOM.csv | Bill of materials (Digikey part numbers) |
Gerbers/ | Manufacturing files (Gerbers + drill files, plus a zipped copy ready to upload to a fab) |
fp-lib-table | Project footprint library table |
Bill of Materials
| Ref | Value | Footprint | Manufacturer | MPN |
|---|---|---|---|---|
| BT1 | 3 V coin cell holder | BatteryHolder_Keystone_1058_1x2032 | Keystone Electronics | 1058 |
| R1 | 220 Ω | R_Axial_DIN0204 | Stackpole Electronics | CF18JT220R |
| D1 | Red LED | LED_D5.0mm | Lumimax | LED5RED |
| SW1 | DPST switch | SW_GF-123-0054 | C&K | S101031MS02Q |
How to open
- Install KiCad (version 10 or newer; the project was made with KiCad 10).
- Clone or download this repository.
- Open
KiCAD_Tutorial_Roborear.kicad_proin KiCad.
Note: The custom switch footprint (
GF-123-0054) is embedded in the PCB file, so the board opens without any extra setup. Thefp-lib-tablepoints to footprint folders on the author's computer. If KiCad warns about missing libraries, you can ignore it or remove those entries.
Course
Follow along with the full course on the Roborear YouTube channel.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 220 ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 3 volt | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | LOGO | Roborear Footprints:Roborear_PCBLOGO | G*** |
| 1 | Red LED | LED_THT:LED_D5.0mm | D1 |
| 1 | SW_DPST_x2 | GF-123-0054:SW_GF-123-0054 | SW1 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the KiCAD Tutorial Roborear PCB?
It measures 42 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCAD Tutorial Roborear use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCAD Tutorial Roborear KiCad files?
From the shahrear-ab/Roborear-KiCAD-Tutorial repository on GitHub, at the commit this page was made from: the board is KiCAD_Tutorial_Roborear.kicad_pcb and its schematic KiCAD_Tutorial_Roborear.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCAD Tutorial Roborear design in my own project?
Its repository states no licence, so its author keeps all rights: ask shahrear-ab before reusing the design.