ShadeStar44/Spinal-Disc-Replacement-CodeCode for data processing and analyzes of models of potential replacement spinal discs.
PcbSeniorSeminar is an open-source printed circuit board by ShadeStar44, from the ShadeStar44/Spinal-Disc-Replacement-Code repository on GitHub. It is a 2-layer board of 70 × 83 mm with 44 parts on 44 nets, routed with 320 tracks and 23 vias.
It is built around the TSR 1-2433E and LM2596S-5.0. Its parts include 26 resistors, 10 connectors, 3 capacitors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Code for data processing and analyzes of models of potential replacement spinal discs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | footprints:RC0402N_PAN | R3, R5, R7, R9, R11, R13, R15, R16, R17, R18, R19, R20 |
| 12 | 2k | footprints:RC0402N_PAN | R4, R6, R8, R10, R12, R14, R21, R22, R23, R24, R25, R26 |
| 1 | 10 nF | footprints:G-033_MUR | C3 |
| 1 | 1k Ohm | footprints:RC0402N_PAN | R1 |
| 1 | 220pf | footprints:G-033_MUR | C1 |
| 1 | 24v In | footprints:TE_282837-2 | J1 |
| 1 | 3k Ohm | footprints:RC0402N_PAN | R2 |
| 1 | 47uH Inductor | Inductor_SMD:L_Bourns_SRP1038C_10.0x10.0mm | L1 |
| 1 | 680uF | footprints:CAP_FT_G_PAN-M | C2 |
| 1 | Adafruit_Feather_HUZZAH32_ESP32 | Module:Adafruit_Feather_WithMountingHoles | A1 |
| 1 | D_Schottky | footprints:VS-30WQ03FN-M3Untitled | D1 |
| 1 | Dir | footprints:TE_282837-2 | J10 |
| 1 | Encoder1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | Encoder2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12 |
| 1 | Encoder3 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | Encoder4 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14 |
| 1 | Encoder5 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J15 |
| 1 | Encoder6 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J16 |
| 1 | GNDout | footprints:691137710003 | J9 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | PWMoutXYA | footprints:691137710003 | J8 |
| 1 | TSR1-2433E | Converter_DCDC:Converter_DCDC_TRACO_TSR1-xxxxE_THT | U2 |
It measures 70 × 83 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the TSR 1-2433E and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShadeStar44/Spinal-Disc-Replacement-Code repository on GitHub, at the commit this page was made from: the board is Control_Systems_Code/pcbSeniorSeminar.kicad_pcb and its schematic Control_Systems_Code/pcbSeniorSeminar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShadeStar44 before reusing the design.
rayanyahiaoui13/24PowerLEDsController
The goal of this system is to provide independent and precise control of a 24-LED matrix composed of high-power LEDs to independently illuminate 24 wells of a Greiner plate containing duckweed.
titio72/n2k_router_arduino
Integrated GPS, meteo, tachometer, and speed sensor for NMEA2000 networks
totaldesaster/SimpleFOC-Serial-Driver
Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.
Unimakers/CDR-2027
Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…
ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.
Pierowheelz/ac-vent-controller
ESP32-based controller for Aircon Vents with stepper motors.
Poky88/HAPCAN_Modul_RFID_CTECKA
This repository contains complete hardware and software resources for the development and implementation of a new extension module for the HAPCAN home automation system.