

RGB LED Holder
A custom IoT device based on the ESP32 microcontroller that illuminates a fiber optic display.
- Size
- 25.4 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 4
- Pads
- 28
- Tracks, vias
- 123, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jul 2025
- Updated
- 5 Jul 2025
Overview
RGB LED Holder is an open-source printed circuit board by shaanpatel00, from the shaanpatel00/fiber-optic-display-ESP32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.4 × 31.8 mm with 8 parts on 4 nets, routed with 123 tracks and 0 vias.
Its parts include 6 diodes and 1 connector. It belongs with the lEDs and displays boards of this library.
README
README.mdfiber-optic-display-ESP32
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED_RAGB | LED_THT:LED_D5.0mm-4_RGB | D1, D2, D3, D4, D5, D6 |
| 1 | LOGO | graphics:sp-initials-logo-negative | G*** |
| 1 | R A G B | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the RGB LED Holder PCB?
It measures 25.4 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RGB LED Holder use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RGB LED Holder KiCad files?
From the shaanpatel00/fiber-optic-display-ESP32 repository on GitHub, at the commit this page was made from: the board is RGB-LED-Holder/RGB-LED-Holder.kicad_pcb and its schematic RGB-LED-Holder/RGB-LED-Holder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RGB LED Holder design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).