
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Tesa Mounting Tool – Orientation & Motion with BNO055
Tesa mountingtool PCB v3 is an open-source printed circuit board by sh1rokuro, from the sh1rokuro/tesa_mountingtool repository on GitHub. It is a 2-layer board of 59 × 67 mm with 11 parts on 39 nets, routed with 73 tracks and 0 vias.
Its parts include 4 resistors, 4 diodes, 2 ICs and 1 switch.
Tesa Mounting Tool – Orientation & Motion with BNO055
This project was developed as part of the Cross-Innovation-Class for Tesa. It serves as an interactive guidance system for the precise application of Tesa Powerstrips along a wall. The system detects orientation and motion deviations using the BNO055 sensor and visually indicates them via LEDs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 270 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 4 | LED | LED_THT:LED_D3.0mm | D1_Unten1, D2_Links1, D3_Rechts1, D4_Oben1 |
| 1 | 2472 | 2472:MODULE_2472 | U3 |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_SPST_Omron_B3F-40xx | SW1 |
| 1 | ~ | custom_kicad_footprint_lib:JOY-IT Node_MCU_ESP32 | U2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 59 × 67 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sh1rokuro/tesa_mountingtool repository on GitHub, at the commit this page was made from: the board is pcb/tesa_mountingtool_PCB v3.kicad_pcb and its schematic pcb/tesa_mountingtool_PCB v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sh1rokuro before reusing the design.