
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0

PCB layout files for the beach scene with WS2812 LEDs.
Beach ws2812 is an open-source printed circuit board by sgust, from the sgust/beach-ws2812-PCB repository on GitHub. It is a 4-layer board of 260 × 120 mm with 374 parts on 215 nets, routed with 2,163 tracks and 364 vias.
It is built around the LM1117-3.3 and WS2812B. Its parts include 185 capacitors, 173 diodes, 4 resistors, 2 ICs and 2 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 177 | 100nF | Capacitors_SMD:C_0603 | C105, C106, C107, C112, C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212 +161 |
| 173 | WS2812B | LEDs:LED_WS2812B-PLCC4 | LED201, LED202, LED203, LED204, LED205, LED206, LED207, LED208, LED209, LED210, LED211, LED212, LED213, LED214, LED215, LED216 +157 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | HOLE1, HOLE2, HOLE3, HOLE4 |
| 2 | 100K | Resistors_SMD:R_0603 | R103, R104 |
| 2 | 10µF/16V | Capacitors_Tantalum_SMD:Tantalum_Case-B_EIA-3528-21_Reflow | C109, C110 |
| 2 | 15pF | Capacitors_SMD:C_0603 | C101, C102 |
| 2 | Pushbutton | beach-ws2812:SMD_SWITCH_6x6_LSG | SW101, SW102 |
| 1 | 1000µF/16V | Capacitors_SMD:c_elec_10x10 | C111 |
| 1 | 10K | Resistors_SMD:R_0603 | R101 |
| 1 | 10nF | Capacitors_SMD:C_0603 | C103 |
| 1 | 1K | Resistors_SMD:R_0603 | R102 |
| 1 | 1µF | Capacitors_SMD:C_0603 | C104 |
| 1 | 4.7µF | Capacitors_SMD:C_0603 | C108 |
| 1 | 8MHz | beach-ws2812:Euroquartz_MQ | X101 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON101 |
| 1 | CONN_01X03 | Connect:PINHEAD1-3 | P101 |
| 1 | LED placement | beach-ws2812:leds | G*** |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U102 |
| 1 | STM32F103C(8-B)Tx | Housings_QFP:TQFP-48_7x7mm_Pitch0.5mm | U101 |

dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0

gblach/HexGateway
An internet gateway for Bluetooth LE, OpenThread and/or Zigbee devices.

dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.

rac2030/IoT-conference-badge
Hardware badge to be used in MakeZürich 2018 (https://makezurich.ch) and GDG DevFest Switzerland 2018 (https://devfest.ch)


bananacocodrilo/BananaBoard-hardware
Keyoard PCB based on the mitosis and chimera builds. It uses a Core51822 as mcu, has a mini-usb battery charger and underglow with WS2812b leds

vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s

It measures 260 × 120 mm and has 4 copper layers, 1.6 mm thick.
374 parts, built around the LM1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sgust/beach-ws2812-PCB repository on GitHub, at the commit this page was made from: the board is beach-ws2812.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sgust before reusing the design.