
Stmshieldfull
sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.

There are my personal PCBs... contact me for licensing information.
Piezojig is an open-source printed circuit board by sgenomics, from the sgenomics/pcbs repository on GitHub. It is a 2-layer board of 70.8 × 49 mm with 13 parts on 6 nets, routed with 65 tracks and 2 vias.
There are my personal PCBs... contact me for licensing information.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | GND | Socket_Strips:Socket_Strip_Straight_1x01 | P11, P13, P13 |
| 1 | SAMP | Socket_Strips:Socket_Strip_Straight_1x01 | P10 |
| 1 | SAMP | piezojig:SMA | P12 |
| 1 | Z+X | piezojig:piezopad | P8 |
| 1 | Z+XO | piezojig:SMA | P9 |
| 1 | Z+Y | piezojig:piezopad | P6 |
| 1 | Z+YO | piezojig:SMA | P7 |
| 1 | Z-X | piezojig:piezopad | P2 |
| 1 | Z-XO | piezojig:SMA | P1 |
| 1 | Z-Y | piezojig:piezopad | P5 |
| 1 | Z-YO | piezojig:SMA | P4 |

sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.


sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.

sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.



sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.





sgenomics/pcbs
There are my personal PCBs... contact me for licensing information.



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 70.8 × 49 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sgenomics/pcbs repository on GitHub, at the commit this page was made from: the board is stm_pcbs/piezojig/piezojig.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sgenomics before reusing the design.