Skip to the content
2 layersSold, the printed circuit board in 3D

паяльник на ардуино (тысячи их)

Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
10
Pads
28
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 4
Created
24 Dec 2020
Updated
24 Dec 2020

Overview

Sold is an open-source printed circuit board by sevkin, from the sevkin/solderino repository on GitHub, published under the WTFPL licence. It is a 2-layer board with 11 parts on 10 nets.

Its parts include 4 resistors, 3 capacitors and 2 connectors.

README

README.md

Паяльник на Ардуино (тысячи их)

solderino

Идея, код, схемы, фото и прочее доступны по лицензии WTFPL

Parts

11
QtyValueFootprintReferences
4RResistors_SMD:R_0805_HandSolderingR4, R5, R6, R7
2CCapacitors_SMD:C_0805_HandSolderingC1, C2
2CONN_01X04Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mmJ10, J11
2POTPotentiometers:Potentiometer_Trimmer-EVM3ERV2, RV3
1CPCapacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_HandC3

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

What parts does the Sold use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sold KiCad files?

From the sevkin/solderino repository on GitHub, at the commit this page was made from: the board is kicad/sold.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sold design in my own project?

Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).