2 layers36 × 16 mm
2 layers35.3 × 7.1 mm
Nanoraptor nanosegment
settinger/nanoraptor_nanosegment9- Size
- 35.3 × 7.1 mm
- Copper layers
- 2
- Thickness
- 0.22 mm
- Parts
- 33
- Nets
- 16
- Pads
- 88
- Tracks, vias
- 101, 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Nov 2022
- Updated
- 18 Nov 2022
Overview
Nanoraptor nanosegment is an open-source printed circuit board by settinger, from the settinger/nanoraptor_nanosegment repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 35.3 × 7.1 mm with 33 parts on 16 nets, routed with 101 tracks and 10 vias.
It is built around the ATTINY20-UU. Its parts include 7 diodes, 3 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | Conn_01x01 | TestPoint:TestPoint_Keystone_5019_Minature | J**, J**, J**, J**, J1, J1, J2, J2, J2, J2, J2, J3, J4, J6, J8, J8 +3 |
| 7 | LED | nanoraptor_0805_7seg:sunled0603 | D2, D3, D4, D5, D6, D7, D8 |
| 3 | 1kΩ | Resistor_SMD:R_0201_0603Metric | R1, R2, R3 |
| 1 | ATtiny20-U | Package_CSP:WLCSP-12_1.403x1.555mm_P0.4mm_Stagger | U1 |
| 1 | AVR-TPI-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | TCR3UG | Package_CSP:WLCSP-4_0.64x0.64mm_P0.35mm | U2 |
The 32 most common of 33 parts.
More from settinger/nanoraptor_nanosegment
1Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
Questions
How big is the Nanoraptor nanosegment PCB?
It measures 35.3 × 7.1 mm and has 2 copper layers, 0.22 mm thick.
What parts does the Nanoraptor nanosegment use?
33 parts, built around the ATTINY20-UU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nanoraptor nanosegment KiCad files?
From the settinger/nanoraptor_nanosegment repository on GitHub, at the commit this page was made from: the board is kicad/nanoraptor_nanosegment.kicad_pcb and its schematic kicad/6pin_7seg_0806.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nanoraptor nanosegment design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).