
Microusb breakout panel
settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u
Microusb breakout single is an open-source printed circuit board by settinger, from the settinger/microusb_socket_panel repository on GitHub. It is a 2-layer board of 14.2 × 7.1 mm with 7 parts on 5 nets, routed with 15 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | LOGO | microusb_plug_goof:usb | G*** |
| 1 | microusb_pcb_socket | microusb_plug_goof:microusb_PCB_socket | J1 |
The 2 most common of 7 parts.

settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 14.2 × 7.1 mm and has 2 copper layers, 0.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the settinger/microusb_socket_panel repository on GitHub, at the commit this page was made from: the board is single socket/microusb_breakout_single.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask settinger before reusing the design.