
Microusb breakout panel
settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u
Microusb breakout clover is an open-source printed circuit board by settinger, from the settinger/microusb_socket_panel repository on GitHub. It is a 2-layer board of 30.5 × 16.3 mm with 33 parts on 5 nets, routed with 60 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LOGO | microusb_plug_goof:usb | G***, G***, G***, G*** |
| 4 | microusb_pcb_socket | microusb_plug_goof:microusb_PCB_socket | J1, J1, J1, J1 |
The 8 most common of 33 parts.

settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

settinger/microusb_socket_panel
A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-breadboard-power-supply-u

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 30.5 × 16.3 mm and has 2 copper layers, 0.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the settinger/microusb_socket_panel repository on GitHub, at the commit this page was made from: the board is 4-socket clover/microusb_breakout_clover.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask settinger before reusing the design.