2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT
2 layers40 × 13.2 mm
Usb sample
Seshak-code/usb_samplesample pcb for DIY Digispark USB circuit
- Size
- 40 × 13.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 11
- Pads
- 36
- Tracks, vias
- 73, 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 May 2026
- Updated
- 25 May 2026
Overview
Usb sample is an open-source printed circuit board by Seshak-code, from the Seshak-code/usb_sample repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 13.2 mm with 12 parts on 11 nets, routed with 73 tracks and 3 vias.
It is built around the ATTINY45-20SU. Its parts include 4 resistors, 3 diodes, 2 ICs, 2 connectors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 3V6 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 68R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | ATtiny45-20S | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | ~ | Sesha's_Custom_Library:PCB_USB_connector | U2 |
Questions
How big is the Usb sample PCB?
It measures 40 × 13.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb sample use?
12 parts, built around the ATTINY45-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb sample KiCad files?
From the Seshak-code/usb_sample repository on GitHub, at the commit this page was made from: the board is usb_sample.kicad_pcb and its schematic usb_sample.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb sample design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers31 × 30.5 mm
Christmas tree barrier
Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba
17 parts32GPL-3.0 - 4 layers158.8 × 104.1 mm
- 2 layers35.6 × 30.5 mm
- 2 layers
- 2 layers
Cbs badge
cbs-ntcore/cbs_badge
This badge is designed to highlight digital fabrication techniques that are commonly used in the Neurotechnology Core(NTCore) at the Center for Brain Science at Harvard University.
13 parts5 - 2 layers65 × 56.5 mm
PiSupply
enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs
80 parts4LGPL-3.0 - 2 layers40.6 × 20.3 mm
Bike motor shim
mar0x/bike_motor_shim
Shimano e-bike shim between wheel sensor and motor to "extend the limits"
21 parts4