Skip to the content
2 layers16.8 × 9.4 mmPcb s08, the printed circuit board in 3D

A simple standalone continuity tester, based on the ultra-inexpensive Padauk microcontrollers and a piezo buzzer.

Size
16.8 × 9.4 mm
Copper layers
2
Thickness
0.8 mm
Parts
12
Nets
9
Pads
29
Tracks, vias
41, 5
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Jul 2020
Updated
21 Dec 2022

Overview

Pcb s08 is an open-source printed circuit board by serisman, from the serisman/pdk-continuity-tester repository on GitHub. It is a 2-layer board of 16.8 × 9.4 mm with 12 parts on 9 nets, routed with 41 tracks and 5 vias.

Its parts include 5 resistors, 1 capacitor, 1 IC and 1 diode.

README

pcb-s08/README.md

pcb-s08 (pdk-continuity-tester)

Schematic

(for 8-pin PFS154, PFS173, PMS150C, PMS15A, PMS152, PMS154C, PMS171B) Schematic

PCB

This PCB design was created with KiCad, and has been shared on OSHPARK. There are also gerber files available in the output/gerber/ directory, or gerber.zip.

Attach a ~12mm Piezo Buzzer to the end. PMS150C, PMS15A, and PMS171B require an Active (on/off) buzzer. PFS154, PFS173, PMS152, and PMS154C use a Passive (PWM) buzzer.

Attach a CR1225 (or CR1220, CR1025, CR927, etc...) to the bottom after soldering a wire to hold it (and act as the positive contact).

3D Top 3D Bottom

PCB Top PCB Bottom

Parts

12
QtyValueFootprintReferences
247kmodules:R_0603R4, R5
1100nmodules:C_0603C1
1120modules:R_0805R2
13V_Cellmodules:BatteryHolder_12mmBT1
147modules:R_0603R1
14k7modules:R_0603R3
1Buzzermodules:Buzzer_12x9.5RM7.6BZ1
1LEDmodules:LED_0805D1
1PDKPackage_SO:SOP-8_3.9x4.9mm_P1.27mmU1
1Probe_GNDmodules:Pad_2.0x3.0mmTP2
1Probe_PA3modules:Pad_2.0x3.0mmTP1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Pcb s08 PCB?

It measures 16.8 × 9.4 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Pcb s08 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb s08 KiCad files?

From the serisman/pdk-continuity-tester repository on GitHub, at the commit this page was made from: the board is pcb-s08/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb s08 design in my own project?

Its repository states no licence, so its author keeps all rights: ask serisman before reusing the design.