2 layers111 × 61 mm
2 layers
Seguidor CI
sergioschina/programacaohardware22Repositorio dedicado a materia de arquitetura de hardware 22
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 38
- Pads
- 62
- Tracks, vias
- 80, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Nov 2022
- Updated
- 19 Nov 2022
Overview
Seguidor CI is an open-source printed circuit board by sergioschina, from the sergioschina/programacaohardware22 repository on GitHub. It is a 2-layer board with 11 parts on 38 nets, routed with 80 tracks and 0 vias.
It is built around the ARDUINO UNO R3 and TIP120. Its parts include 4 connectors, 2 resistors, 2 diodes and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdprogramação de Hardware 22
Repositorio dedicado a materia de arquitetura de hardware 22
Neste repositório, será realizado a entrega de todos os trabalhos de programação de hardware de 2022.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2 |
| 2 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Pilhas_com_chave | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J2 |
| 1 | Roda_1 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J4 |
| 1 | Roda_2 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | Sensores | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J1 |
Questions
What parts does the Seguidor CI use?
11 parts, built around the ARDUINO UNO R3 and TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Seguidor CI KiCad files?
From the sergioschina/programacaohardware22 repository on GitHub, at the commit this page was made from: the board is AlexsanderGustavoTiagoLucas/Seguidor_CI/Seguidor_CI.kicad_pcb and its schematic AlexsanderGustavoTiagoLucas/Seguidor_CI/Seguidor_CI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Seguidor CI design in my own project?
Its repository states no licence, so its author keeps all rights: ask sergioschina before reusing the design.
Similar boards
- 2 layers68.8 × 53.6 mm
STEPPER MOTOR
Monita-Ciea/UNO-Stepper-Motor-Shield-KiCad
Design and development of an Arduino UNO-compatible unipolar stepper motor shield using KiCad.
27 parts - 2 layers190 × 80 mm
Pcb shield
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
42 parts915 - 2 layers364.4 × 167.3 mm
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers489.6 × 170.7 mm
Mission control
dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122
286 parts31CC-BY-4.0 - 2 layers168 × 123 mm
V2 - 2
RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
131 parts26 - 2 layers
Catozap
jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent
3 parts18GPL-3.0