
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A macro pad is a compact, standalone auxiliary keypad in which each key can be programmed to execute shortcuts, launch applications, or perform multi-step automated commands with a single press.
Macro pad is an open-source printed circuit board by sepantanemati, from the sepantanemati/Macro-pad repository on GitHub, published under the MIT licence. It is a 2-layer board of 123.5 × 76.2 mm with 15 parts on 34 nets, routed with 104 tracks and 2 vias.
It belongs with the keyboards and input boards and the RP2040 boards of this library.
The Macro Pad:
A macro pad is a compact, standalone auxiliary keypad in which each key can be programmed to execute shortcuts, launch applications, or perform multi-step automated commands with a single press.
My primary goal with this macro pad is to enable shortcut activation with a single click.
Components Used:
The PCB is designed using KiCad.
This project is developed for https://halflife.hackclub.com/
schematic:
pcb layout:
3d pcb layout:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | btn1, btn2, btn3, btn4, btn5, btn6, btn7, btn8, btn9, btn10, btn11, btn12 |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 123.5 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sepantanemati/Macro-pad repository on GitHub, at the commit this page was made from: the board is macro_pad.kicad_pcb and its schematic macro_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).