

Pivi shield
Part of the PIVI smart meter. Kicad designs of the PIVI sensor board.
- Size
- 85 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 120
- Pads
- 378
- Tracks, vias
- 1,152, 71
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Mar 2015
- Updated
- 21 Oct 2015
Overview
Pivi shield is an open-source printed circuit board by sentrisense, from the sentrisense/pivi-hardware repository on GitHub. It is a 2-layer board of 85 × 75 mm with 120 parts on 120 nets, routed with 1,152 tracks and 71 vias.
It is built around the ATXMEGA128A3U-AU, TLV70233DBV and SJ-3503-SMT-TR, with the BLM15BB221SN1 among its other parts. Its parts include 54 resistors, 28 capacitors, 12 connectors, 11 inductors and 2 ICs. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATXMEGA128A3U-AU
TQFP-64(14x14)-40℃~+85℃ 1.6V~3.6V 128KB 12bit 12bit 2KB 32MHz 50 8/16 Bit 8KB AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TLV70233DBV
SOT-23-5-40℃~+125℃@(Tj) 1 3.3V 300mA 35uA 375mV@(300mA) 48uVrms 5.5V 68dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSJ-3503-SMT-TR
-Audio Connectors (Headphones)CUIBLM15BB221SN1
04021 200mA 220Ω@100MHz 800mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
README
README.mdPIVI
This are the Kicad designs files for the PIVI sensor board. All the code in this repository is licensed Creative Commons

Copyright (C) 2014, 2015 LESS Induestries S.A.
Author: Sebastian Cerone sebascerone@lessindustries.com
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10K | Resistors_SMD:R_0603 | R2, R10, R11, R12, R13, R14, R15, R24, R25, R27, R28, R30, R31, R33, R34, R36 +3 |
| 12 | 10k | Resistors_SMD:R_0603 | R3, R4, R5, R19, R21, R22, R44, R46, R47, R51, R53, R54 |
| 9 | 220k | Resistors_SMD:R_2512 | R16, R17, R18, R41, R42, R43, R48, R49, R50 |
| 8 | 100nF | Capacitors_SMD:C_0603 | C4, C5, C6, C7, C8, C10, C11, C12 |
| 6 | 10uF | Capacitors_SMD:C_0805 | C17, C18, C19, C20, C21, C22 |
| 6 | 22R | Resistors_SMD:R_0603 | R23, R26, R29, R32, R35, R38 |
| 6 | sj-3503-smt | LESS:SJ-3503-SMT | J1, J2, J3, J4, J5, J6 |
| 4 | 1u | Resistors_SMD:R_0603 | L3, L7, L9, L11 |
| 3 | 100 | Resistors_SMD:R_0603 | R20, R45, R52 |
| 3 | 100n | Capacitors_SMD:C_0603 | C15, C24, C27 |
| 3 | 1uH | Inductors_NEOSID:Neosid_Inductor_SM-NE30_SMD1210 | L6, L8, L10 |
| 3 | 270 | Resistors_SMD:R_0603 | R7, R8, R9 |
| 3 | 330nF | Capacitors_SMD:C_0603 | C16, C25, C28 |
| 3 | 33uF | Capacitors_SMD:C_0805 | C14, C23, C26 |
| 2 | 10pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 10uF | Capacitors_SMD:C_0603 | C3, C9 |
| 2 | 1uH | Resistors_SMD:R_0603 | L4, L5 |
| 1 | 10uH | Resistors_SMD:R_0805 | L2 |
| 1 | 1u | Inductors_NEOSID:Neosid_Inductor_SM-NE30_SMD1210 | L1 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C13 |
| 1 | 2.222K | Resistors_SMD:R_0603 | R1 |
| 1 | 32.768kHz +/-20PPM 7pF SMD | Sparkfun:SparkFun-CRYSTAL-32KHZ-SMD_EPSON_MC146 | X1 |
| 1 | 470 | Resistors_SMD:R_0603 | R6 |
| 1 | 5v selector | Pin_Headers:Pin_Header_Straight_1x03 | JP1 |
| 1 | ATXMEGA128A3U-A | LESS:TQFP64_14X14MM | IC1 |
| 1 | BLM15BB221SN1 | Resistors_SMD:R_0402 | FB1 |
| 1 | CONN_01X04 | LESS:Terminal_block_4_pos | P4 |
| 1 | CONN_02X20 | LESS:Pin_Header_Straight_2x20_SMD_mirror | P5 |
| 1 | Debug uart | Pin_Headers:Pin_Header_Straight_1x04 | P6 |
| 1 | External 5v | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | JTAG connector | Pin_Headers:Pin_Header_Straight_2x05 | P1 |
| 1 | LED | LEDs:LED-0603 | D1 |
| 1 | LED_RGB | LEDs:LED_RGB_PLLC-6 | D2 |
| 1 | Recom_Power_RAC10-05SC/277 | LESS:RAC10-xxSC-277 | P3 |
| 1 | TLV70233DBV | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U3 |
The 112 most common of 120 parts.
Similar boards
- 2 layers

- 4 layers

- 2 layers175.4 × 50 mm

- 4 layers36 × 36 mm

- 4 layers24.1 × 37 mm

- 2 layers36 × 36 mm

- 2 layers88.5 × 56.8 mm

Generic bottom test jig
chickadee-tech/g-test-bot
Generic Test Jig Bottom for Polystack boards
49 parts - 2 layers36 × 36 mm

Questions
How big is the Pivi shield PCB?
It measures 85 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pivi shield use?
120 parts, built around the ATXMEGA128A3U-AU, TLV70233DBV, SJ-3503-SMT-TR and BLM15BB221SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pivi shield KiCad files?
From the sentrisense/pivi-hardware repository on GitHub, at the commit this page was made from: the board is design/pivi-shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pivi shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask sentrisense before reusing the design.