

HG Breakout
Custom PCB for Storming Robotics Electrical Engineering 2018
- Size
- 45.7 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 41
- Pads
- 147
- Tracks, vias
- 410, 109
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Aug 2018
- Updated
- 17 Aug 2018
Overview
HG Breakout is an open-source printed circuit board by senpaiashley, from the senpaiashley/SR-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.7 × 68.6 mm with 23 parts on 41 nets, routed with 410 tracks and 109 vias.
Its parts include 13 capacitors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C7, C8, C13 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C9 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10, C12 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C11 |
| 1 | 10118193-0001LF:FCI_10118193-0001LF | ||
| 1 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | TH1 | |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x25_P2.54mm_Vertical | ||
| 1 | EFM32HG310F64G-A-QFN32:SL_EFM32G200F64-QFN32T | ||
| 1 | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | ||
| 1 | PTS645SK50SMTR92LFS:SW_PTS645SK50SMTR92LFS | ||
| 1 | SOT95P280X145-5N:SOT95P280X145-5N | ||
| 1 | S2B-PH-SM4-TB_LF__SN_:S2B-PH-SM4-TB(LF)(SN) | ||
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the HG Breakout PCB?
It measures 45.7 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HG Breakout use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HG Breakout KiCad files?
From the senpaiashley/SR-board repository on GitHub, at the commit this page was made from: the board is HG_Breakout/HG_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HG Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).