2 layers58.8 × 55.7 mm
AiO i2s DAC
martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth
102 parts24MIT
2 layers34 × 16 mm
Usb uart dongle V1.0.0
semblie/usb_uart_dongle4- Size
- 34 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 24
- Pads
- 84
- Tracks, vias
- 152, 30
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2023
- Updated
- 16 Jun 2023
Overview
Usb uart dongle V1.0.0 is an open-source printed circuit board by semblie, from the semblie/usb_uart_dongle repository on GitHub. It is a 2-layer board of 34 × 16 mm with 22 parts on 24 nets, routed with 152 tracks and 30 vias.
It is built around the CP2102-GM, AC0603FR-10330RL and 06036D104KAT2A, with the JMK212ABJ106MG-T, 155060RS73200 and C0603V102KDRACTU among its other parts. Its parts include 5 capacitors, 4 resistors, 4 diodes, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
Main components
9
CP2102-GM
QFN-28-EP(5x5)-40℃~+85℃ 1 12Mbps 3V~3.6V USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
AC0603FR-10330RL
0603-55℃~+155℃ 100mW 330Ω Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount
06036D104KAT2A
0603100nF 6.3V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKyocera AVXMultilayer Ceramic Capacitors MLCC - SMD/SMT
JMK212ABJ106MG-T
080510uF 6.3V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
155060RS73200
SMD,1.6x1.0mm-40℃~+85℃ 120° 20mA 2V~2.4V 45mcd~150mcd 624nm 632nm Discrete Diode Red Water Clear SMD,1.6x1.0mm LED Indication - Discrete ROHSWürth ElektronikLED Indication - DiscreteC0603V102KDRACTU
06031kV 1nF ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTRN73R1JTTD1004F50
0603Chip Resistor - Surface MountKOA Speer Electronics
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
SS-3390S-L1
SMD,7.2x3.5mm-40℃~+85℃ 1.5mm 10000 times 12V 3.5mm 50mA 7.2mm Black DPDT Rectangular Columnar SMD(SMT) Tab Surface Mount,Vertical SMD,7.2x3.5mm Slide Switches ROHSXKB ConnectionSlide Switches
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1.0mm_Mask_2.0mm | f:Fiducial_1mm_Mask2mm | Fid1, Fid2, Fid3 |
| 3 | 330R | f:0603 | R1, R2, R3 |
| 2 | 0.1uF_6.3V | f:0603 | C2, C5 |
| 2 | 10uF_6.3V | f:0805 | C1, C3 |
| 2 | RED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 1 | 1000pF_1kV | f:0603 | C4 |
| 1 | 1M | f:0603 | R4 |
| 1 | 48037-0001 | f:USB_48037-0001 | USB1 |
| 1 | 61200621721 | f:61200621721 | J1 |
| 1 | CP2102-GM | f:QFN-28 | IC1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LOGO | LOGO | G*** |
| 1 | SP0503BAHT | f:SOT-143-4 | D2 |
| 1 | SS-3390S-L1 | f:SS-33905-1 | SW1 |
| 1 | SolderJumper_2_Open | f:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
Questions
How big is the Usb uart dongle V1.0.0 PCB?
It measures 34 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb uart dongle V1.0.0 use?
22 parts, built around the CP2102-GM, AC0603FR-10330RL, 06036D104KAT2A and JMK212ABJ106MG-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb uart dongle V1.0.0 KiCad files?
From the semblie/usb_uart_dongle repository on GitHub, at the commit this page was made from: the board is Electronics/usb_uart_dongle_V1.0.0.kicad_pcb and its schematic Electronics/usb_uart_dongle_V1.0.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb uart dongle V1.0.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask semblie before reusing the design.
Similar boards
- 2 layers99.8 × 60.2 mm
Irrigation IoT
VictorRavani/Irrigation_IoT
This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.
79 parts4MIT - 2 layers96.7 × 57.6 mm
MCU
Jonathan-E-Luna/CustomChargerSchematicPCB
During my groups capstone, I was in charge of the PCB design for all custom hardware components utilized
31 parts - 2 layers62 × 26 mm
- 2 layers191.3 × 169.2 mm
- 2 layers58.3 × 36.3 mm
- 4 layers91 × 52 mm
Filament dryer monitor
alessandrocardelli/filament-dryer-monitor
ESP32 controller for eSUN eBOX Lite. main is the non-heating SAFE BRING-UP reference; its heater output remains locked OFF.
110 parts - 2 layers45 × 172 mm
Ph portable refrigerator v2 hw
Blackcastus/ESP32_A7670
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
188 parts