2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers15.2 × 27.9 mm
FeatherSwitch
Sembazuru/FeatherSwitchAdaFruit Feather Enable Switch Board
- Size
- 15.2 × 27.9 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 12
- Nets
- 2
- Pads
- 11
- Tracks, vias
- 6, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Apr 2017
- Updated
- 13 Mar 2018
Overview
FeatherSwitch is an open-source printed circuit board by Sembazuru, from the Sembazuru/FeatherSwitch repository on GitHub. It is a 2-layer board of 15.2 × 27.9 mm with 12 parts on 2 nets, routed with 6 tracks and 0 vias.
Its parts include 2 connectors and 1 switch. It belongs with the microcontroller boards boards of this library.
README
README.mdFeatherSwitch
AdaFruit Feather Enable Switch Board. Designed in KiCAD.
This board connects the GND pin and the EN pin (opposite sides of the Feather boards) together with a switch, ideally across the underside of the Feather board. The switch is next to the battery connector. It doesn't obscure the battery connector, but does make it more difficult to remove the battery. This can be ameliorated by mounting this board to either a Feather Wing, or the Feather Doubler (or Tripler) This allows conveniently turning off the board without disconnecting either a battery or the USB cable. This first version of the board has hole size and spacing for AdaFruit#805 slide switch or mechanical equivalent. Note: The holes are slightly too small for 0.25"sq header pins.
The design works best if the 2oz copper option is selected to get 0.8mm (1/32", or half standard) thick boards. These boards are available to order using the button below.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 12 | CDE_misc:PAD-Clear_AdaFruit_Feather | MH4 |
| 1 | 13 | CDE_misc:PAD_AdaFruit_Feather | MH3 |
| 1 | A0 | CDE_misc:PAD-Clear_AdaFruit_Feather | MH6 |
| 1 | ARf | CDE_misc:PAD-Clear_AdaFruit_Feather | MH5 |
| 1 | BAT | CDE_misc:PAD-Clear_AdaFruit_Feather | MH1 |
| 1 | En | CDE_misc:PAD_AdaFruit_Feather | J1 |
| 1 | GND | CDE_misc:PAD_AdaFruit_Feather | J2 |
| 1 | LOGO | logos:crane_0.25in_silkscreen | G*** |
| 1 | LOGO | logos:OSHW_04mm_copper_noMask | G*** |
| 1 | Slide Switch | CDE_misc:SW_ADAFRUIT_508 | SW1 |
| 1 | USB | CDE_misc:PAD_AdaFruit_Feather | MH2 |
The 11 most common of 12 parts.
Questions
How big is the FeatherSwitch PCB?
It measures 15.2 × 27.9 mm and has 2 copper layers, 0.8 mm thick.
What parts does the FeatherSwitch use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FeatherSwitch KiCad files?
From the Sembazuru/FeatherSwitch repository on GitHub, at the commit this page was made from: the board is FeatherSwitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FeatherSwitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sembazuru before reusing the design.
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696