4 layers93.1 × 47.3 mm
MainPCB V3
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
74 parts
2 layers240.6 × 26.5 mm
Thumb V1
selina101/CreateLabWorkRepo with projects done during my thesis and the valorisation.
- Size
- 240.6 × 26.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 7
- Pads
- 31
- Tracks, vias
- 89, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Dec 2024
- Updated
- 10 Dec 2024
Overview
Thumb V1 is an open-source printed circuit board by selina101, from the selina101/CreateLabWork repository on GitHub. It is a 2-layer board of 240.6 × 26.5 mm with 8 parts on 7 nets, routed with 89 tracks and 23 vias.
Its parts include 4 ICs and 3 capacitors.
README
README.mdCreateLab work
In this repo you will find all the work done during the master thesis and during the master valorisation (02/2024-12/2024).
For the PCBs, you will find all the KiCAD files, as well as the gerber files to be able to order PCBs. The file 'PCB library' contains the footprint, the symbols and the 3D models of all the components used for all of the PCBs.
Goat power PCB
Contains the power distribution PCB for Max's robot.
All the components were bought separately and soldered by hand.
Hands
Contains two folders, one with the hall sensors and the other with the FSRs.
For all the Hall sensor PCBs, all the components were bought separately and soldered by hand.
For the FSRs PCBs, there are no components to solder, one only needs to buy the PCBs and cut the velostat.
There is a main PCB that allows for connections. On this PCB, 1206 10kOhm pullup resistors are used, and need to be soldered by hand. If the electrodes are used for a hydrogel, a Adafruit ADS7830 Breakout board is needed.
IMU
The IMU folder contains various versions of the IMU.
IMU_V2 is the round PCB that is used for the squid/tentacle projects. They are also the PCBs that need to be mounted on Max's PCB.
IMU_V3 is the sets of PCBs designed for the Helix type robot. There is the main PCBs that has the space for 2 perpendicular IMUs, the teensy and the I2C Qwiic connectors. There are also the files for the rectangular IMUs.
Both types are accompanied by a pdf explaining everything needed to know for the IMUs.
The IMUs are bought with the top side soldered on by JLCPCB. They have recently changed there classification of these sensors, so they must be bought in larger quantities and in panels because the PCBs are too small otherwise. The minimum quantity for the V3 was 45 IMUs. The back side of the PCBs must then be soldered by hand. For the main PCB, all the components were bought separately and soldered by hand.
MPXH6115AC6U_breakout
Contains the files for the PCBs that Kai asked for, it is a breakout for the MPXH6115AC6U pressure sensor.
Tongue
Contains the files for Benhui's Tongue PCB.
All the components were bought separately and soldered by hand.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3 |
| 3 | TMAG5273A2QDBVR | MasterThesis_library:TMAG5273A2 | U1, U2, U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | ~ | MasterThesis_library:7Pin_FingerConnector_for 0527450797 | U8 |
More from selina101/CreateLabWork
11- 2 layers57 × 60 mm
Finger FSR V1 mainPCB
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
41 parts - 4 layers80 × 70 mm
Max MainPCB
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
33 parts - 2 layers50 × 155 mm
Benhui Tongue
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
30 parts - 2 layers55.3 × 82.3 mm
Finger FSR V1 length
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
28 parts - 2 layers55.3 × 82.3 mm
Finger FSR V1 height
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
26 parts - 2 layers188.9 × 26.5 mm
Index Middle Ring V3
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
16 parts - 2 layers
- 2 layers51.3 × 31.6 mm
IMU MainPCB
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
13 parts - 2 layers157.3 × 26.5 mm
Pinky V1
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
12 parts - 2 layers20 × 18 mm
MPXH6115AC6U breakout
selina101/CreateLabWork
Repo with projects done during my thesis and the valorisation.
4 parts
Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Thumb V1 PCB?
It measures 240.6 × 26.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thumb V1 use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thumb V1 KiCad files?
From the selina101/CreateLabWork repository on GitHub, at the commit this page was made from: the board is Hands/Hall sensors/PCBs/Thumb_V1/Thumb_V1.kicad_pcb and its schematic Goat power PCB/Max_MainPCB/Max_MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thumb V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask selina101 before reusing the design.