Skip to the content
2 layers157.3 × 26.5 mmPinky V1, the printed circuit board in 3D

Repo with projects done during my thesis and the valorisation.

Size
157.3 × 26.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
7
Pads
47
Tracks, vias
140, 28
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
5 Dec 2024
Updated
10 Dec 2024

Overview

Pinky V1 is an open-source printed circuit board by selina101, from the selina101/CreateLabWork repository on GitHub. It is a 2-layer board of 157.3 × 26.5 mm with 12 parts on 7 nets, routed with 140 tracks and 28 vias.

Its parts include 6 ICs and 5 capacitors.

README

README.md

CreateLab work

In this repo you will find all the work done during the master thesis and during the master valorisation (02/2024-12/2024).

For the PCBs, you will find all the KiCAD files, as well as the gerber files to be able to order PCBs. The file 'PCB library' contains the footprint, the symbols and the 3D models of all the components used for all of the PCBs.

Goat power PCB

Contains the power distribution PCB for Max's robot.

All the components were bought separately and soldered by hand.

PCB

Hands

Contains two folders, one with the hall sensors and the other with the FSRs.

For all the Hall sensor PCBs, all the components were bought separately and soldered by hand.

MasterThesis_Electronics

For the FSRs PCBs, there are no components to solder, one only needs to buy the PCBs and cut the velostat.

There is a main PCB that allows for connections. On this PCB, 1206 10kOhm pullup resistors are used, and need to be soldered by hand. If the electrodes are used for a hydrogel, a Adafruit ADS7830 Breakout board is needed.

FSR_Finger

IMU

The IMU folder contains various versions of the IMU.

IMU_V2 is the round PCB that is used for the squid/tentacle projects. They are also the PCBs that need to be mounted on Max's PCB.

IMU_V2

IMU_V3 is the sets of PCBs designed for the Helix type robot. There is the main PCBs that has the space for 2 perpendicular IMUs, the teensy and the I2C Qwiic connectors. There are also the files for the rectangular IMUs.

IMU_V3

Both types are accompanied by a pdf explaining everything needed to know for the IMUs.

The IMUs are bought with the top side soldered on by JLCPCB. They have recently changed there classification of these sensors, so they must be bought in larger quantities and in panels because the PCBs are too small otherwise. The minimum quantity for the V3 was 45 IMUs. The back side of the PCBs must then be soldered by hand. For the main PCB, all the components were bought separately and soldered by hand.

MPXH6115AC6U_breakout

Contains the files for the PCBs that Kai asked for, it is a breakout for the MPXH6115AC6U pressure sensor.

Pressure Breakout board

Tongue

Contains the files for Benhui's Tongue PCB.

All the components were bought separately and soldered by hand.

Tongue PCB

Parts

12
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C2, C3, C4, C5
5TMAG5273A2QDBVRMasterThesis_library:TMAG5273A2U1, U2, U3, U4, U5
1LOGOLOGOG***
1~MasterThesis_library:7Pin_FingerConnector_for 0527450797U8

More from selina101/CreateLabWork

11
  • 4 layers93.1 × 47.3 mmMainPCB V3, the printed circuit board in 3D

    MainPCB V3

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    74 parts
  • 2 layers57 × 60 mmFinger FSR V1 mainPCB, the printed circuit board in 3D

    Finger FSR V1 mainPCB

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    41 parts
  • 4 layers80 × 70 mmMax MainPCB, the printed circuit board in 3D

    Max MainPCB

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    33 parts
  • 2 layers50 × 155 mmBenhui Tongue, the printed circuit board in 3D

    Benhui Tongue

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    30 parts
  • 2 layers55.3 × 82.3 mmFinger FSR V1 length, the printed circuit board in 3D

    Finger FSR V1 length

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    28 parts
  • 2 layers55.3 × 82.3 mmFinger FSR V1 height, the printed circuit board in 3D

    Finger FSR V1 height

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    26 parts
  • 2 layers188.9 × 26.5 mmIndex Middle Ring V3, the printed circuit board in 3D

    Index Middle Ring V3

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    16 parts
  • 2 layersIMU6, the printed circuit board in 3D

    IMU6

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    15 parts
  • 2 layers51.3 × 31.6 mmIMU MainPCB, the printed circuit board in 3D

    IMU MainPCB

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    13 parts
  • 2 layers240.6 × 26.5 mmThumb V1, the printed circuit board in 3D

    Thumb V1

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    8 parts
  • 2 layers20 × 18 mmMPXH6115AC6U breakout, the printed circuit board in 3D

    MPXH6115AC6U breakout

    selina101/CreateLabWork

    Repo with projects done during my thesis and the valorisation.

    4 parts

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Pinky V1 PCB?

It measures 157.3 × 26.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pinky V1 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pinky V1 KiCad files?

From the selina101/CreateLabWork repository on GitHub, at the commit this page was made from: the board is Hands/Hall sensors/PCBs/Pinky_V1/Pinky_V1.kicad_pcb and its schematic Goat power PCB/Max_MainPCB/Max_MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pinky V1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask selina101 before reusing the design.