2 layers91.5 × 91.5 mm
Trigger led box
nippoo/lawrence-button-two
This repository contains the STL files, KiCad design and Gerber files, and Arduino code used in building the Lawrence Button Two.
28 parts1
2 layers50.3 × 31.8 mm
Xlr5-passthrough breakout hw
second-string/xlr5-passthrough-breakout-hwMount and breakout board for XLR5 male and female panel mount connectors
- Size
- 50.3 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 56
- Tracks, vias
- 69, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Aug 2026
- Updated
- 3 Aug 2026
Overview
Xlr5-passthrough breakout hw is an open-source printed circuit board by second-string, from the second-string/xlr5-passthrough-breakout-hw repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.3 × 31.8 mm with 13 parts on 11 nets, routed with 69 tracks and 0 vias.
It is built around the B3B-XH-AM(LF)(SN), NC5FAH and NC5MAH. It belongs with the interfaces and adapters boards of this library.
Main components
3
B3B-XH-AM(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 3 3A 3P 5.75mm 7mm 9.9mm Brass K Pin、With post PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
NC5FAH
插件5P Female Right Angle XLR 插件 XLR (Cannon) Connectors ROHSNeutrikXLR (Cannon) Connectors
NC5MAH
插件5P Male Right Angle XLR 插件 XLR (Cannon) ConnectorsNeutrikCircular Connectors & Cable Connectors
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SolderJumper_2_Bridged | Second String Studios:SolderJumper_2_Bridged_THIN | JP1, JP2, JP3, JP4, JP5 |
| 2 | B3B-XH-AM(LF)(SN) | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J2, J3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 1 | NC5FAH | Second String Studios:NEUTRIK_NC5FAH | J4 |
| 1 | NC5MAH | Second String Studios:NEUTRIK_NC5MAH | J1 |
Questions
How big is the Xlr5-passthrough breakout hw PCB?
It measures 50.3 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xlr5-passthrough breakout hw use?
13 parts, built around the B3B-XH-AM(LF)(SN), NC5FAH and NC5MAH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xlr5-passthrough breakout hw KiCad files?
From the second-string/xlr5-passthrough-breakout-hw repository on GitHub, at the commit this page was made from: the board is xlr5-passthrough-breakout-hw.kicad_pcb and its schematic xlr5-passthrough-breakout-hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xlr5-passthrough breakout hw design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers80 × 54 mm
Pl60c dmx
tsmiltonAgents/pl60c-dmx-wakeup
A small ESP32-S3 board that drives the wired DMX512 input of a Neewer PL60C panel light so the light can be ramped up slowly in the morning (sunrise alarm). Rev A, 2026-09-02.
40 parts - 8 layers120 × 100 mm
- 2 layers65 × 65 mm
Ki PCB
DanielBilo/Fume_extractor
A solder fume extractor with a custom BMS and battery system
71 parts1 - 2 layers61.5 × 100.3 mm
- 2 layers45 × 100 mm
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
