4 layers88 × 80 mm
Vetroplach board
jankrejci/vetroplach
An ultrasonic anemometer: KiCad PCB designs and ESP32-S3 firmware.
132 parts1
4 layers40 × 20 mm
Pmod2hdmi
seckinalbamya/Pmod-HDMI4Pmod HDMI converter
- Size
- 40 × 20 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 20
- Pads
- 59
- Tracks, vias
- 289, 114
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Apr 2026
- Updated
- 7 Jun 2026
Overview
Pmod2hdmi is an open-source printed circuit board by seckinalbamya, from the seckinalbamya/Pmod-HDMI repository on GitHub. It is a 4-layer board of 40 × 20 mm with 12 parts on 20 nets, routed with 289 tracks and 114 vias.
It is built around the MT3608 and 1N5819WS. Its parts include 4 capacitors, 3 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
2README
README.mdPmod to HDMI Converter
This is a Pmod to HDMI converter circuit that you can use at low resolutions.
- 100 Ohm impedance-matched differential lines
- 4-layer PCB (for impedance matching)
- MT3608 boost converter
Materials List (BOM):
- 1x MT3608
- 1x 206A-SEAN-R03 HDMI connector
- 2x 22uF 0805 capacitor
- 2x 100nF 0805 capacitor
- 1x 1N5819WS SOD-323 diode
- 1x 02x06 2.54mm 90-degree pin header
- 1x 4.7K 0805 resistor
- 1x 10K 0805 resistor
- 1x 110K 0805 resistor
- 1x 15K 0805 resistor
Pmod - HDMI Çevirici
Düşük çözünürlüklerde kullanabileceğiniz Pmod - HDMI çevirici devresidir.
- 100 Ohm empedans uyumlu diferansiyel hatlar
- 4 katlı PCB (empedans uyumu için)
- MT3608 boost converter
Malzeme Listesi:
- 1x MT3608
- 1x 206A-SEAN-R03 HDMI konnektör
- 2x 22uF 0805 kondansatör
- 2x 100nF 0805 kondansatör
- 1x 1N5819WS SOD-323 diyot
- 1x 02x06 2,54mm 90 derece pin header
- 1x 4,7K 0805 direnç
- 1x 10K 0805 direnç
- 1x 110K 0805 direnç
- 1x 15K 0805 direnç
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1 |
| 1 | 110K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2 |
| 1 | 15K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R3 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 4u7 | Resistor_SMD:R_1020_2550Metric_Pad1.33x5.20mm_HandSolder | L1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | HDMI_A_1.4 | lib:206A-SEAN-R03 | J2 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
Similar boards
- 4 layers90 × 93 mm
- 4 layers
- 6 layers131 × 27.4 mm
- 2 layers108.5 × 69.9 mm
- 2 layers107.7 × 84.4 mm
TEG
Lazztech/TEG
Electronics for a thermal energy harvesting prototype: a small TEG array feeds a sub-1 V energy-harvesting front-end (BQ25504), which charges a buffer capacitor and backs up a regulated 5 V rail for a Noctua 5 V PWM fan…
33 parts - 4 layers100 × 150 mm
- 2 layers22 × 56 mm
Esp32s2-funprog
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
79 parts114
Questions
How big is the Pmod2hdmi PCB?
It measures 40 × 20 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pmod2hdmi use?
12 parts, built around the MT3608 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod2hdmi KiCad files?
From the seckinalbamya/Pmod-HDMI repository on GitHub, at the commit this page was made from: the board is pmod2hdmi.kicad_pcb and its schematic pmod2hdmi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod2hdmi design in my own project?
Its repository states no licence, so its author keeps all rights: ask seckinalbamya before reusing the design.