Skip to the content
2 layers46.5 × 11.4 mmPlateau allumage, the printed circuit board in 3D

Plateau allumage

sebou29/KZ650-ignition1

KZ650 ignition arduino nano

Size
46.5 × 11.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
4
Pads
18
Tracks, vias
35, 8
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Sep 2022
Updated
30 Sep 2022

Overview

Plateau allumage is an open-source printed circuit board by sebou29, from the sebou29/KZ650-ignition repository on GitHub. It is a 2-layer board of 46.5 × 11.4 mm with 14 parts on 4 nets, routed with 35 tracks and 8 vias.

It is built around the A1302ELHLT-T.

Main components

1

README

README.md

KZ650-ignition

KZ650 ignition arduino nano

Arduino nano ignition for four stroke engine motorcycle (KZ650) Inspired by aepl and aecp Optimized for kickstarter

Parts

14
QtyValueFootprintReferences
4MountingHole_PadConnector_Wire:SolderWirePad_1x01_SMD_5x10mm+5V, GND, Sensor, Sensor
2A1302ELHLT-TPackage_TO_SOT_SMD:SOT-23WU1, U2

The 6 most common of 14 parts.

Similar boards

  • 2 layers11 × 9 mmMagLev Switch, the printed circuit board in 3D

    MagLev Switch

    famichu/MagLev_Switch_MX

    The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.

    4 parts467
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0

Questions

How big is the Plateau allumage PCB?

It measures 46.5 × 11.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Plateau allumage use?

14 parts, built around the A1302ELHLT-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Plateau allumage KiCad files?

From the sebou29/KZ650-ignition repository on GitHub, at the commit this page was made from: the board is PCB/plateau/plateau allumage.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Plateau allumage design in my own project?

Its repository states no licence, so its author keeps all rights: ask sebou29 before reusing the design.